ITRCA

It was solid 11s with full interior and he said he was gonna tweak it some more and pull 10s

As long as you can afford it Hondata is the way to go..and as long as you have someone in your area who can actually tune it,afer dyno tunning with a Hondata it should run like a factory turbo car.

Good Luck

what is FMU? What kind of turbo set up would you suggest??? THANKS!!!! Fuel Management Unit Vortech is what most use In the new Honda Tunning mag a guy with a gsr using a type r head is using a T3/To4 60-1 from Innovative Turbo Systems and at 25psi is pulling 11s with full interior and 400whp. oh y...

Yeah,that would be pretty cool to have a photo section,I'd like to see everyones rides

Honestly I never cover anything, Just make sure that everything is closed tight- Oil cap, Distributor and stuff like that. I go to those do-it-yourself carwashes with a spray bottle of Simple Green and a toilet brush. Spray the simple green every where then brush and if you see a extra dirty spot r...

works for me,but everytime I look at my big honkin calipers behind my wheel I can't see going any smaller than 15s but you can call them if ya want :) ,by the way I had a 99si civic for two years and loved it and I think your set up is pretty damn cool,something I definitly woulda done if I blew up ...

Here in Malta the Fastest Type R till now is a type r b18c engine fitted in a honda civic 1992model 3door. it has a lightened flywheel, pedal clutch aem air filter and 80bhp shot nos. It runs frequently 12.6s 113mph Damn,that guy needs slicks.A guy here in Indiana is pulling in the 11s with the c5 ...

e r i c s 9 9 s i wrote:Lenso makes a 13" drag wheel that'll fit over the ITR's brake assembly. $285 I beleive for the two wheels... they you could run a 23" slick.. visit exospeed.com for more info.

Are you sure,I went to the site and to the wheels and saw 285 but how do you know they will clear??

98cwitr wrote:watch for flying axles

OH it will have upgraded ones before it touches the track with slicks on,I already watched a few of my freinds make that mistake.

I was wanting to make 100% sure what the smallest wheel I'll be able to use for slicks on my R and also what size slicks anyone would recommend..is 14 inch too small for my car..oh yeah and it's setting pretty low and my big factory tires are tuckin in so I'm guessing I'll have to raise it up when I...

8lb upgrade pulley and upgraded fuel pump

Cool man,let me know how everything works out with that cause I'm waiting on a beater car purchase so I can send mine off also :) just PM me or something to keep me updated.I'm satisfied with my setup but I wanna go ahead and get that intercooler setup and throw some internals in and upgrade to a 10...

For anyone with a supercharged R most of you might know because it was posted on here a long time ago but a company called LHT performance makes a custom intercooler for the jrsc,you have to send them your jrsc manifold and they put runners in it for either water or antifreeze and they show dyno cha...

I have only made a few runs at a crappy 8th mile track and got solid 9's on street tires with zero traction,my tires were slipping through every gear.I figure If I throw some slicks and a upgraded clutch on i'll be in mid 13's to low 13's and then it's time to upgrade to 10psi and see what I can do....

88k,been supercharged for around three years and running perfect

Well here I am :) .I got the JR kit with the upgrade 7or8psi pulley(no one really knows how much it is for sure)and the map controller,boost timing controller,and boost retard.I got up to almost 90k on my car and stock internals,the kit has been on for close to three years and no probs at all but I ...

hmm,what all do you have to do to the radiator support anyway cause I was thinking of going with the JDM front also

I got a 2.5 setup and a test pipe that replaces my cat but mine is supercharged and it sounds very nice,I would recommend it but you'll have to find someone who can do some good exhaust work

Way too many people saying headers instead of header

98TYPR wrote:MINE AND MY GIRLS

I'm gonna have to find me a ricer chick damnit

Very nice

I'm kinda new to the site and would like to see all your R's if possible,I realize this has probably already been done but I'm too lazy to go through all the old posts :D I started it off with a pic of mine even though I already have the pics still on here labeled "Pics of my Supercharged ITR f...

Thanks for all the comments guys,I'm 23 and this car is my 11th car I've owned now and I think I'm finally happy and I plan on keeping this one

Only thing I don't like about the RSX is the 6spd,everyone is misshifting them and blowing up the motors after they put lots of money in them.I never drove one though so I don't know how hard it would be but I do know if I had one I wouldn't touch a track with it till I could drive it perfect.

Quick question actually, im purchasing the jackson racing supercharger within the next month or so and was curious what you did to your AEM intake to make it fit correctly...im guessing chop it up and jimmy rig it?? Let me know, or send me some detailed pics by PM...thanks!! AEM makes a cold air sp...