Spoon Caliper Rebuild Kit

JDM FACTOR · Post by **JDM FACTOR** » October 15th, 2009, 10:07 pm

Hello, new user to ITRCA, old user switching over from Honda-tech.

Just wanted to know if you guys were familiar with the seals, I need to rebuild the calipers after the car sitting for a while and wanted to know if this is something I need to contact a spoon dealer about or if I can get the parts local.

Any info would be appreciated, thank you!

Markusirealius01 · October 15th, 2009, 11:41 pm

Hey buddy. I'm a spoon dealer. let me make a few calls and find out for you. I have actually never had any one ask me that question but i assure you I will get you some answers.

JDM FACTOR · Post by **JDM FACTOR** » October 16th, 2009, 3:08 pm

Thanks man, I'd really appreciate it!

ithrowpoop · Post by **ithrowpoop** » October 22nd, 2009, 12:46 am

i have been looking for said kit for about 2 years. if one is found please post about it.

Markusirealius01 · Post by **Markusirealius01** » October 22nd, 2009, 1:26 pm

Alright you guys. I have some answers.
You need the spoon seal kits for the twin block calipers. I have 2 in stock they are $95.40 ea. and shipping to anywhere in the lower 48 is gonna be about 10 bucks. I do paypal for all out of state customers. (provides insurance for both of us.) Those of you who want them please give ma a call. I will be more than happy to get them out ASAP. Or you can go ahead and send me the payment along with your shipping address and ALL contact info.

Pay Pal. Topendperformance1@gmail.com

Mark Abernathy
Top End
404 713 9731

ithrowpoop · Post by **ithrowpoop** » October 22nd, 2009, 1:37 pm

are the pad retaining clips that bolt into the caliper available also? there are 4 per caliper, held in with small allen head screws.

Markusirealius01 · Post by **Markusirealius01** » October 23rd, 2009, 3:47 am

ok man im sure i can get those to but i doubt i have them in stock. i will get in contact with spoon tomorrow and ill let you know.

ithrowpoop · Post by **ithrowpoop** » October 23rd, 2009, 10:39 am

thanks.

coolhandluke · Post by **coolhandluke** » October 27th, 2009, 10:23 am

Great information Mark. Thank you for helping out the community with this.

Markusirealius01 · October 27th, 2009, 11:30 am

Your very welcome. ! I LOVE the ITR community and even though I do not own one any more. I still feel welcome here and am still eager to help you all out with as much as possible. I am still looking into the clips and should find out by tomorrow.

ithrowpoop · Post by **ithrowpoop** » October 27th, 2009, 7:17 pm

thanks for your help.

JDM FACTOR · Post by **JDM FACTOR** » October 29th, 2009, 3:57 pm

Thanks very much. Is it $95 each caliper or for the pair? I'll be contacting you soon!

Markusirealius01 · Post by **Markusirealius01** » October 31st, 2009, 2:57 pm

OK you guys Still working on finding those clips. It is 95 for the whole seal kit. (both calipers) Pm me or give me a call.

Markusirealius01 · Post by **Markusirealius01** » November 5th, 2009, 5:56 pm

Alright no luck on the clips so far. But i still have those seal kits, but if you want them i would advise getting them ahead of time cause once there gone i will have no ETA on the next shipment. and that could mean months.

zygspeed · Post by **zygspeed** » January 12th, 2010, 11:12 pm

I'd like to take at least one of those twin block rebuild/seal kits off your hands. Ed

ITRCA

Spoon Caliper Rebuild Kit

Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit

Re: Spoon Caliper Rebuild Kit