Need a flange, but don't know what size or where to buy?

[elambz]

So I got a stock header, cat and exhaust for my car, but there's one problem. The mid pipe has no flange to bolt to the cat. I called up a shop who I know would do good work and it'd be right, but they want $150 to weld a flange on. What size flange do I need for that, and where in the world would I buy one? I know if I can get the parts, I have friends who can weld it.

[coolhandluke]

Does the shop not have flanges in stock?

[elambz]

Does the shop not have flanges in stock?

He probably does, but I didn't think to just buy the flange from him.

[coolhandluke]

I would think that price would include the flange, but you can ask him to double check. A flanged setup is also the best way to go here, good thinking.

[elambz]

I just think the $150 price is a little high just to weld a flange onto a pipe. Maybe I'm wrong though.

[itr01-1137]

You can get an individual flange from kteller dot com for $7

http://kteller.com/shop/index.php?page= ... &Itemid=71

and

http://kteller.com/shop/index.php?page= ... &Itemid=71

I have a 2000 Integra LS with a new 'B' pipe. I measured the inside diameter, before I put the 3 bolts from the cat in. That inside diameter is 1 7/8"

If you check the part number for the gen 3 intergras (not counting the R) you find the same part number for all of the cats.

So you need a 3 hole flange for a 2" outside diameter 'B' pipe.

Does anyone disagree, with this?

[turbohf]

NICE. i will have to remember that link! thanks

i did a test pipe for a buddy a little while back, ordered the cat side from JHPUSA, but didnt notice/find the back end of the cat. luckily i had the one i cut off my turbo exhaust (put a different flange on my exhaust) that was still new...

and i sure as hell wouldnt spend 150bucks to have 1 flange welded on. i can buy a brand new B-pipe from acura for close to that. thats a $20-40 job w/flange.