FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, more
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, more
Silver Volk TE-37 16x7, 4x114 (JDM 96-spec size)
Asking $1200 obo...not really sure the market on these wheels as they seem to be pretty rare in this configuration.
I need to downsize on the amount of wheels here. I wanted to use these but have not got around to it.
Condition is used: some scratches, one wheel has a decent curb mark on the exterior, balance and mount great though
....
Mugen Intake
Condition is good, missing the wheelwell bracket and the bracket by the air filter. I bought it like this and did not know they were missing. They are not relevant though.
Asking $550 obo
...
ITR Motor Mounts
They're roughly 2 years old, original rubber, all 5 mounts. I'm not sure of the mileage, but visibly look good. I replaced them with some Mugen Mounts to tighten up a few things. These could be great for a rebuild or a swap into an EG. I'm unsure on price, so...
Asking $150 obo...definitely more flexible with pricing on these.
...
Stock JDM 96 spec ITR wheels
I got them painted blue/green. I stripped the outside of them and painted them this faux powder coat graphite color. It will strip right off and can be painted whatever. They were completely balanced and straight when I had them on the balance machine in early July.
Asking $450 obo
...
I am more flexible on pricing with some items vs others. I'm sure there are plenty of people who will vouch more if you have any concerns. Thanks for looking!
Asking $1200 obo...not really sure the market on these wheels as they seem to be pretty rare in this configuration.
I need to downsize on the amount of wheels here. I wanted to use these but have not got around to it.
Condition is used: some scratches, one wheel has a decent curb mark on the exterior, balance and mount great though
....
Mugen Intake
Condition is good, missing the wheelwell bracket and the bracket by the air filter. I bought it like this and did not know they were missing. They are not relevant though.
Asking $550 obo
...
ITR Motor Mounts
They're roughly 2 years old, original rubber, all 5 mounts. I'm not sure of the mileage, but visibly look good. I replaced them with some Mugen Mounts to tighten up a few things. These could be great for a rebuild or a swap into an EG. I'm unsure on price, so...
Asking $150 obo...definitely more flexible with pricing on these.
...
Stock JDM 96 spec ITR wheels
I got them painted blue/green. I stripped the outside of them and painted them this faux powder coat graphite color. It will strip right off and can be painted whatever. They were completely balanced and straight when I had them on the balance machine in early July.
Asking $450 obo
...
I am more flexible on pricing with some items vs others. I'm sure there are plenty of people who will vouch more if you have any concerns. Thanks for looking!
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Might be pm'ing you for the mooogen
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
PM away
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
If Lucas doesn't want it, I know 2 people have PM'd me about the intake, and I've pushed them Ryans way. Now that he's not selling... you shouldn't have it long.
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Those are cheap prices Jay. Please buy with confidence.
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- ITRCA Member
- Posts: 451
- Joined: December 18th, 2008, 7:11 pm
- Location: NORFOLK/NOVA
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
The TE's are a pretty rare offset/lug pattern combo.
Almost 2yrs on the dot for the mounts
Man those itr wheels would look NICE on the ay-cord
Almost 2yrs on the dot for the mounts
Man those itr wheels would look NICE on the ay-cord
I KILL car thieves.
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Ha, thanks Nathaniel! That would be funny if they ended up over there again.
I agree, the Volks are pretty rare. I wouldn't be too sad if no one bought them. I wanted to use them as track wheels but never got around to finding tires for them. Now, my garage closet is over-filled with wheels/tires/etc.
I agree, the Volks are pretty rare. I wouldn't be too sad if no one bought them. I wanted to use them as track wheels but never got around to finding tires for them. Now, my garage closet is over-filled with wheels/tires/etc.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- ITRCA Member
- Posts: 451
- Joined: December 18th, 2008, 7:11 pm
- Location: NORFOLK/NOVA
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Yeah I would love to have them back for the accord, they were un-nicked un-bent un-whored out R wheels when Nolan had them and thats why I wanted em so bad.. new buyer will be happy with those wheels for sure.
As for the Volks, I say you keep them.. they are in great shape for being all original and would be KILLER track wheels. + it would be hard to find another set like that again.
As for the Volks, I say you keep them.. they are in great shape for being all original and would be KILLER track wheels. + it would be hard to find another set like that again.
I KILL car thieves.
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
If the Mugen intake and motor mounts sell quickly, I will probably keep the Volks. The second set of ITR wheels can go either way. I do need to downsize on wheels here. I have an extra set of wheels for the TSX and RSX here too, so it's super crowded in there
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- ITRCA Member
- Posts: 451
- Joined: December 18th, 2008, 7:11 pm
- Location: NORFOLK/NOVA
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Ohh geez, I didnt figure you for a wheel whore
Buy with confidence everyone, Jay is good peepz and he has quality parts.
Buy with confidence everyone, Jay is good peepz and he has quality parts.
I KILL car thieves.
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Yep, summer wheels and winter wheels...that stuff adds up when you have two daily drivers here (two people).
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- ITRCA Member
- Posts: 110
- Joined: March 21st, 2010, 10:00 pm
- Location: Montana
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
bump for ITR goodies!! GL with the sale bro!!
DD: 01 NHBP ITR #873
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Thanks everyone!
I have a lot of interest in everything, but no one has actually purchased something. With that said, everything is still available. Please, help me clean out my garage for my own sanity...and other people's sanity too
I have a lot of interest in everything, but no one has actually purchased something. With that said, everything is still available. Please, help me clean out my garage for my own sanity...and other people's sanity too
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- 401R
- Posts: 2489
- Joined: December 12th, 2005, 2:36 pm
- Location: SC
- Contact:
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
FYI Jay has been heavily involved in the ITR community for a long time. Please buy with confidence.
WTB: ODB1 VTEC Distributor!!!!!!!!!!!
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
2011 ITR Expo Calendar
http://www.itrca.com/forums/viewtopic.php?f=33&t=12472
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Thanks to Mugen Mike undercutting the Mugen Intake price ...
Mugen Intake...now $500.
Mugen Intake...now $500.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Bump?
...
Actually, I wanted to add my recently purchased front and rear mugen strut bars too. Tuition is due, so every dollar helps!
...
Actually, I wanted to add my recently purchased front and rear mugen strut bars too. Tuition is due, so every dollar helps!
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Motor mounts have a couple interested buyers, but everything else is still available. I'm kind of surprised the intake is still available.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- Senior ITRCA Member
- Posts: 1301
- Joined: November 6th, 2002, 9:18 pm
- Location: Milwaukee, WI
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
D'oh! Sorry about that!cheezthis wrote:Thanks to Mugen Mike undercutting the Mugen Intake price ...
Mugen Intake...now $500.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
'98 ITR #142
I wish I had a cak. -Dawn
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
No sorry needed Did your's sell? I hadn't checked.Mugen Mike wrote:D'oh! Sorry about that!cheezthis wrote:Thanks to Mugen Mike undercutting the Mugen Intake price ...
Mugen Intake...now $500.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
FYI Jay has been heavily involved in the ITR community for a long time. Please buy with confidence
Yack-
2002 Honda Challenge H1 Champion
Neptune, Apexi, AEM EMS certified tuner
2002 Honda Challenge H1 Champion
Neptune, Apexi, AEM EMS certified tuner
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Motor mounts are sold!
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
I sent an HT guy you and Mikes way. He's looking for a Mugen intake if either of you still have one FS.
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
Still have it, yep.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
$250 for the ITR wheels ...
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
-
- Stripe = Awesome Gremlin
- Posts: 476
- Joined: November 12th, 2002, 1:15 am
- Location: Chicago, IL
Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo
If the Volks do not sell soon, I will use them as track wheels this year. Just FYI for anyone debating on them.
The ITR wheels will still be available though.
The ITR wheels will still be available though.
FS: 06 TSX, 6MT, w/DC5R LSD
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606
http://www.itrca.com/forums/viewtopic.php?f=44&t=12606