Pittsburgh raceway

Discuss HPDE, wheel to wheel, autocross, rally, rally-cross, drag racing topics here.
Locked
josh201
New ITRCA Member
Posts: 17
Joined: May 29th, 2003, 8:14 pm
Location: pittsburgh, PA
Contact:

Pittsburgh raceway

Post by josh201 »

any one ever go there. it was called keystone before. they just changed it this year. it's a nice track and every tuesday and thursdays it's test n tune night. and every once in a while they have fast and the furious night where it's just all sport compacts.
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Re: Pittsburgh raceway

Post by ITR41 »

I am there every week
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
josh201
New ITRCA Member
Posts: 17
Joined: May 29th, 2003, 8:14 pm
Location: pittsburgh, PA
Contact:

Post by josh201 »

i haven't gone yet this year. my friend who's in my club his uncle owns that place well part owner.... so you'll probably see him alot.
green civic ex 97 looks stock( that's how he wants it) with gunmetal 7 spoke wheels..

what was your best run up there? this friday is that fast n furious night, 20 to race 10 to watch. i might go i dunno( definatly not racing lol)
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Post by ITR41 »

13.7@107 a few weeks ago and last friday I missed the quick 8 by .07 seconds cause my clutch is garbage
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
josh201
New ITRCA Member
Posts: 17
Joined: May 29th, 2003, 8:14 pm
Location: pittsburgh, PA
Contact:

Post by josh201 »

wow that's friggin fast. i heard it sucked that night though because of the humidity. so maybe you coulda hit a low 13!... if you want to go to a nice track maple grove i hear is like a couple tenths of a second quicker. but it's all the way out in reading.

13.7 ........ are you turbo'd????
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Post by ITR41 »

yeah I am turboed.....on a good clutch I am hoping for low to mid 13's
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
josh201
New ITRCA Member
Posts: 17
Joined: May 29th, 2003, 8:14 pm
Location: pittsburgh, PA
Contact:

Re: Pittsburgh raceway

Post by josh201 »

:shock: did u say turbo! lol dude you should come around to shows lol i love teggys. especially type r's!.. did you ever see the guy from hybrid dynamics with the white type r .. that's a sweet ass car
check out http://www.pittracing.com it's a cool site all pittsburgh ppl.
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Post by ITR41 »

I am on that site and eric from hybrid helped me build my car......I ate lunch with jay and eric everyday over winter during school

ohh my name on pitt racing is boosted ITR
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
josh201
New ITRCA Member
Posts: 17
Joined: May 29th, 2003, 8:14 pm
Location: pittsburgh, PA
Contact:

Post by josh201 »

oh are you the guy that came down to the freezing cold meet. with the white teggy. if so i remember ya now lol
ameg6
New ITRCA Member
Posts: 5
Joined: July 5th, 2003, 9:54 pm
Location: sw pa

Re: Pittsburgh raceway

Post by ameg6 »

i go to PRP all the time, i took second place last year in the all motor on the fast and the furious night last year, my car consistantly runs 13.8's@100mph, i am running a 93 si hatch with an h22a, i was there every week last year so im sure u have seen my car here are some pics of it http://www.jdmcivic.com/~jon/forsale/
ameg6
New ITRCA Member
Posts: 5
Joined: July 5th, 2003, 9:54 pm
Location: sw pa

Re: Pittsburgh raceway

Post by ameg6 »

currently erics car is making 376 hp i heared
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Re: Pittsburgh raceway

Post by ITR41 »

I was all motor last year too I went 14.1@98 and I think I ran you last year. eric made 366whp
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
josh201
New ITRCA Member
Posts: 17
Joined: May 29th, 2003, 8:14 pm
Location: pittsburgh, PA
Contact:

Post by josh201 »

ameg6 your car is almost exactly what i am planning on doing when i get my civic hatch! but i want to do the b16 block with a b20 head, i heard that's a bad ass combo! i hope to get up there this year, but money has been a problem.
you guys gonna come out to the pitt racing meet sat july 19th?
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Post by ITR41 »

don't you want a B20 block and B16A head?
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
josh201
New ITRCA Member
Posts: 17
Joined: May 29th, 2003, 8:14 pm
Location: pittsburgh, PA
Contact:

Post by josh201 »

something like that. my friend told me about it, and i get confused with the combo lol. but supposibly ( i dunno how reliable my source is) it'll make the car run 12's ( i find it hard to belive) with just the swap.
so if i were to boost it and build the internals, would i be running 9's.?
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Post by ITR41 »

you have a lot to learn man. do some research and don't listen to people like that
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
ameg6
New ITRCA Member
Posts: 5
Joined: July 5th, 2003, 9:54 pm
Location: sw pa

Re: Pittsburgh raceway

Post by ameg6 »

itr41, do u have jays old type r?
there was a few real quick type r's up there last year. i am currently awaiting a hotshot header that is gauranteed 25 hp and a lsd...hopefully with slicks ill hit very low 13's, maybe high 12's this year
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Re: Pittsburgh raceway

Post by ITR41 »

no bates has jays. mine was the USDM front end. I talked to you a few times up there I think. I am hoping for low 13's high 12's this year too.....I hope you do go high 12's and beat rozzo.
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
ameg6
New ITRCA Member
Posts: 5
Joined: July 5th, 2003, 9:54 pm
Location: sw pa

Re: Pittsburgh raceway

Post by ameg6 »

lol, i dunno man didnt rozo run 12.80's?? contact me on aol im if u can its a pain talking on here my im is mjgfmg
Locked