ITR Alignment for lapping?

Discuss HPDE, wheel to wheel, autocross, rally, rally-cross, drag racing topics here.
Locked
badkarma
New ITRCA Member
Posts: 15
Joined: June 29th, 2003, 3:57 pm
Contact:

ITR Alignment for lapping?

Post by badkarma »

So what's a good starting point for alignment for the track?
George Knighton
ITRCA Member
Posts: 418
Joined: September 12th, 2002, 8:12 am
Location: Culpeper Virginia (Besieged)
Contact:

Re: ITR Alignment for lapping?

Post by George Knighton »

badkarma wrote:So what's a good starting point for alignment for the track?
You said starting point, so I'd suggest absolutely bone stock. :)

If you're sure of yourself, most of us have success with zero toe in the rear and anywhere from 1/16" to 1/4" total toe out in the front, depending on just how sure you are that you want faster turn in.

This assumes a stock suspension.

Do not get a cheap alignment. It can really screw up how your car feels. :)
Chris N
Site Admin
Posts: 1679
Joined: November 6th, 2002, 7:08 pm
Location: Chicago, Illinois

Re: ITR Alignment for lapping?

Post by Chris N »

1/8" total toe out in front is a good start, in combination with zero toe in rear.
Dave-ROR
Site Admin
Posts: 1023
Joined: September 11th, 2002, 1:42 pm
Location: At Helltrack doing backflips
Contact:

Re: ITR Alignment for lapping?

Post by Dave-ROR »

Chris N wrote:1/8" total toe out in front is a good start, in combination with zero toe in rear.
:thumbup:
-Dave
Some DC2s and a pimp Grand Marquis
Chris N
Site Admin
Posts: 1679
Joined: November 6th, 2002, 7:08 pm
Location: Chicago, Illinois

Re: ITR Alignment for lapping?

Post by Chris N »

oh, and my avatar is better than dave's.
Locked