exhaust blow by....

Integra Type-R Discussion - Discuss general ITR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Locked
Brusso
New ITRCA Member
Posts: 37
Joined: October 16th, 2002, 11:24 pm
Location: California
Contact:

exhaust blow by....

Post by Brusso »

Do you guys get much blow by at full throtle ? I got on it and then off it and noticed a decent amount of smoke from the rearend. Then at the red light it continued to puff some white smoke for a second or two...durring normal driving nothing...... I do have the silencer in and noticed the car
on the dyno smokes way more with the silencer in than out... when it's out almost no smoke..... any ideas.....
P.S.... just put on my nittos 555r and i love it.... also have new dyno numbers.... 350whp at 16psi.... 100 oct.... going to the track Wens... to see how the tires work out....
:P
Last edited by Brusso on October 13th, 2003, 11:02 pm, edited 1 time in total.
Turbo 2.0L-type r... 12.91 AT 111 MPH ON STREET TIRES.... 2.14 60 FT. at 3000 ft alt.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

smoke

Post by Jan Niemi »

usually white smoke is coolant being burned.

I just get a huge puff of black smoke when I hit VTEC on boost, other than that, I do burn about 1 to 2 quarts of oil every 3000 miles of hard driving, no white smoke though.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

numbers

Post by Jan Niemi »

Oh, nice dyno numbers by the way, you should hit low 12s to high 11s on slicks with that much whp.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Brusso
New ITRCA Member
Posts: 37
Joined: October 16th, 2002, 11:24 pm
Location: California
Contact:

Post by Brusso »

I thought coolant also but i never get low..... what kind of times do you think with the nittos and 300whp .... i'm not going to run the 100 oct. wens... so i have to be a little easier on the boost... i'd be happy with a 12.8 or .9 considering the altitude....
Turbo 2.0L-type r... 12.91 AT 111 MPH ON STREET TIRES.... 2.14 60 FT. at 3000 ft alt.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

times

Post by Jan Niemi »

I don't see any reason for not going high 12's with that amount of whp. I would consider drag radials though, you'll get a few tenths in just your 60 foot. I've run a best of 1.8 60 foot on my drag radials, and I don't think I'm quite making 300whp (never dynoed)
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Brusso
New ITRCA Member
Posts: 37
Joined: October 16th, 2002, 11:24 pm
Location: California
Contact:

Post by Brusso »

The 555r are a drag radial... we will see..... you're probably talking about the bfg's.... i was going to get them but they don't make the size i needed.. 205-45-16 for my mugen mf-10's.... i lucked out finding these nittos because nitto doesn't even make these any more...
Turbo 2.0L-type r... 12.91 AT 111 MPH ON STREET TIRES.... 2.14 60 FT. at 3000 ft alt.
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Post by ITR41 »

the nitto's aren't really that good of a drag radial. my friend had 225/50/16's on his eclipse and he ran just as good with his 18" street tires. with that much WHP look for 12.7-13.0 on those tires. you should get 2.0-2.2 60ft's on those as well. as for blow by I get a bit of white everyonce and a while but that is coolant from what I know, but as you said my coolant level never drops so I don't know. I get black smoke on shifts and at vtec crossover. if you start gettin blue then start worrying
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

555s

Post by Jan Niemi »

Brusso wrote:The 555r are a drag radial... we will see..... you're probably talking about the bfg's.... i was going to get them but they don't make the size i needed.. 205-45-16 for my mugen mf-10's.... i lucked out finding these nittos because nitto doesn't even make these any more...
Oh, sorry bro, I haven't kept up on Nitto products since I had my 450s about 4 years ago.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Brusso
New ITRCA Member
Posts: 37
Joined: October 16th, 2002, 11:24 pm
Location: California
Contact:

Post by Brusso »

I ran the nittos on my h22 95 hatch and ran 1.9 sixty foots..... i had yokohamas on befor and there is a night and day difference... hopefully we'll find out tonight what they are good for.... black smoke , white smoke , no blue......... good enough for me...
Turbo 2.0L-type r... 12.91 AT 111 MPH ON STREET TIRES.... 2.14 60 FT. at 3000 ft alt.
Brusso
New ITRCA Member
Posts: 37
Joined: October 16th, 2002, 11:24 pm
Location: California
Contact:

Post by Brusso »

ran at the track all night and no blow by.... a little black puff but that's it... boy do i feel better..
Turbo 2.0L-type r... 12.91 AT 111 MPH ON STREET TIRES.... 2.14 60 FT. at 3000 ft alt.
Erik B
Senior ITRCA Member
Posts: 1029
Joined: September 18th, 2002, 12:29 am
Location: Cheyenne, WY
Contact:

Post by Erik B »

Wait only 350whp on 16 psi with 100 octane in a 2.0L? :?


(when you say Type R are you talking about the B18c5 stroked to a 2.0L or a 2.0L in a TypeR?)
2000 Turbo Integra Type R - 508whp/362lbs tq @ 21psi
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
Brusso
New ITRCA Member
Posts: 37
Joined: October 16th, 2002, 11:24 pm
Location: California
Contact:

Post by Brusso »

it's a fully built b20 block 8.1-8.5 comp....85mm piston ,darton sleeves with a portflow b16 head ... type r intake mani. and throtle body... and si cams... the car made 350 at 6500 rpm ... on 100 oct.. we ran out of time on the dyno and had a spark plug wire pop off on the run... i'm going back to make a couple more runs and should make about 375-380 at 16psi.... and 425 at 20-22 psi... it's built for it... but i don't think my injectors will make it past 18 psi... their only 534cc... i think i need 750's
the car should run 11.5 on slicks at 16 psi... keep your fingers crossed for me...
Turbo 2.0L-type r... 12.91 AT 111 MPH ON STREET TIRES.... 2.14 60 FT. at 3000 ft alt.
Locked