Got Hondata homeys..drool over the pics
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
Got Hondata homeys..drool over the pics
Well, I ordered it today, should be in on the 29th....wifey is very mad....
Picked it up yesterday, here it is sitting on my floor.
Merry Christmas to me!!
Picked it up yesterday, here it is sitting on my floor.
Merry Christmas to me!!
Last edited by Jan Niemi on December 31st, 2003, 2:50 pm, edited 3 times in total.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- Senior ITRCA Member
- Posts: 1029
- Joined: September 18th, 2002, 12:29 am
- Location: Cheyenne, WY
- Contact:
werd....how much did you end up paying for it?
2000 Turbo Integra Type R - 508whp/362lbs tq @ 21psi
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
matt
which matt are we talking about?
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- Senior ITRCA Member
- Posts: 1029
- Joined: September 18th, 2002, 12:29 am
- Location: Cheyenne, WY
- Contact:
Lets hear some numbers everyone running Hondata's...
2000 Turbo Integra Type R - 508whp/362lbs tq @ 21psi
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
on a very safe tune my buddy eric made 366whp on his hondata and a t3/t04b at 15psi
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
I'll let you know as soon as I get mine tuned. Just got my turbo r running. Hopefully it will be tuned soon.
00' Turbo R<-----#167
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
DITTO
ditto here, the Hondata system took all of about 10 minutes to install, I turned the key and she started right up.....now I just have to save up a few hundies for dyno tuning...
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- New ITRCA Member
- Posts: 9
- Joined: January 24th, 2004, 5:41 pm
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
payn
yes. It only took a few days. I bought Hondata's ECU also, it is already socketed for OBDII, so you don't need any conversion harness, just plug it in and voila! Tom burned a base chip that I used to drive the car over to the shop, that put out 240whp on the first run, then tuned it to 295..I was pretty impressed.00B18c5r wrote:jan did u order it though payn?
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.