Integra Type-R Discussion - Discuss general ITR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
jdm cw type r
ITRCA Member
Posts: 76 Joined: January 1st, 2003, 4:14 am
Location: CT.
Post
by jdm cw type r » January 25th, 2004, 11:16 pm
what size speakers are in the front and rear of the type r? thanks
Yes it's a real type r!!!
98cwitr
ITRCA Member
Posts: 207 Joined: November 21st, 2002, 9:54 pm
Post
by 98cwitr » January 25th, 2004, 11:41 pm
6.5"
'98 Integra Type R #363
ITR640
ITRCA Member
Posts: 145 Joined: October 11th, 2003, 12:39 pm
Contact:
Post
by ITR640 » January 25th, 2004, 11:44 pm
6.5", although I've discovered in the past that not all speakers fit in the integra. Their is not alot of room for a bigger magnet. Also their is very little wire in the rear to work with so it makes it difficult to replace.
Utilitarian
ITRCA Member
Posts: 89 Joined: December 5th, 2002, 2:40 pm
Post
by Utilitarian » January 25th, 2004, 11:58 pm
If depth is an issue as it will be for me soon, make mounting plates from plywood to bring the speaker basket out from the door a little so you can still roll the windows down.
LT6916
New ITRCA Member
Posts: 39 Joined: October 22nd, 2003, 3:05 pm
Location: McGuire AFB
Post
by LT6916 » January 26th, 2004, 2:50 am
the front wire harness also is very short, leaving little to work with.
94 Integra GSR - RIP 05/05/05
93 MR2 turbo
USAF
B2FiNiTY
ITRCA Member
Posts: 318 Joined: September 12th, 2002, 1:21 am
Contact:
Post
by B2FiNiTY » January 26th, 2004, 3:42 am
I would recommend just cutting the harness and using some nice connectors to connect everything. That way you get a lot more room to play with.
Trey
Site Admin
Posts: 1004 Joined: September 10th, 2002, 11:43 pm
Location: TN
Contact:
Post
by Trey » January 26th, 2004, 8:35 am
I've found it easiest to use 6" speakers. most aftermarket 6" fit well. I use JL audio and they fit tine with not modification except cutting the stock plastic basket they sit in.
Trey
Bbasso
Post Whore!!
Posts: 6571 Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:
Post
by Bbasso » January 26th, 2004, 3:01 pm
I used my dremel to cut the plastic basket to fit my 6.5 speakers in, other then that no other mod was nessary. (for the front)
swed
Trey
Site Admin
Posts: 1004 Joined: September 10th, 2002, 11:43 pm
Location: TN
Contact:
Post
by Trey » January 26th, 2004, 3:53 pm
I used a dremel as well but the JL 6's seem to be a bit oversized. 6.5 woudl never have fit.
Bbasso
Post Whore!!
Posts: 6571 Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:
Post
by Bbasso » January 26th, 2004, 4:43 pm
I went with the Pioneer premiers...
swed
jdm cw type r
ITRCA Member
Posts: 76 Joined: January 1st, 2003, 4:14 am
Location: CT.
Post
by jdm cw type r » January 26th, 2004, 9:05 pm
so there are 6.5 in the front and what size in the rear?
Yes it's a real type r!!!
Bbasso
Post Whore!!
Posts: 6571 Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:
Post
by Bbasso » January 27th, 2004, 11:21 am
swed
jdm cw type r
ITRCA Member
Posts: 76 Joined: January 1st, 2003, 4:14 am
Location: CT.
Post
by jdm cw type r » January 27th, 2004, 7:43 pm
thanks that helps me out alot much appreciated!!!!
Yes it's a real type r!!!