Good clutch
-
- New ITRCA Member
- Posts: 35
- Joined: November 14th, 2003, 1:06 pm
Good clutch
Need to know what's a good clutch that's not going to break my pockets, and I can drive everyday to work. Allso something that I can use at the drag strip and should I get a flywheel.
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
clutch
I'm super happy with my CM stage 3, I've had it for 2 years now, and have dozens of drag launches on it and about 20K of street driving, and it's still great, pedal effort is almost stock, but engagement is much stronger (plus it doesn't slip on full boost like the stocker...)
BTW I use my stock flywheel, I just had it machined
BTW I use my stock flywheel, I just had it machined
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- New ITRCA Member
- Posts: 35
- Joined: November 14th, 2003, 1:06 pm
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
flywheel
I had it machined just to clean up the glazed surface, they only took off a few thousandths.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
ACT is the way to go
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
-
- New ITRCA Member
- Posts: 35
- Joined: November 14th, 2003, 1:06 pm