dyno video 2000 turbo ITR
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
dyno video 2000 turbo ITR
http://home.comcast.net/~jniemi1970/senseidyno1.mpg
right click save as...11meg
this is one of my 295whp pulls, listen for the VTEC changeover, pretty dramatic sounding...
here's one little clip, I have a vid that's 57meg, too big for me to host,
so I will post little clips here and there..
here's another, that's Dropspeed standing by the monitor with the earmuffs on....cough...pussy....cough...(from the board, and HT), he has the fastest na ITR in Michigan, I have the fastest turbo ITR in Michigan (that we know of) anyways he had to stop by and witness the smackdown..here's Matt's face when he saw the numbers...
http://home.comcast.net/~jniemi1970/senseidyno6.mpg
right click save as...11meg
this is one of my 295whp pulls, listen for the VTEC changeover, pretty dramatic sounding...
here's one little clip, I have a vid that's 57meg, too big for me to host,
so I will post little clips here and there..
here's another, that's Dropspeed standing by the monitor with the earmuffs on....cough...pussy....cough...(from the board, and HT), he has the fastest na ITR in Michigan, I have the fastest turbo ITR in Michigan (that we know of) anyways he had to stop by and witness the smackdown..here's Matt's face when he saw the numbers...
http://home.comcast.net/~jniemi1970/senseidyno6.mpg
Last edited by Jan Niemi on February 22nd, 2004, 7:14 pm, edited 1 time in total.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- New ITRCA Member
- Posts: 13
- Joined: February 15th, 2004, 4:38 pm
- Location: Chicago, IL
- Contact:
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
exhaust
With turbo and high compression, you have to run somewhat of a rich tune to keep things cool and to prevent detonation, the car is tuned at 11.5 air fuel ratio pretty much across the band... at the end of the pull, that's just oil getting sucked into the intake and then burned (I still need to hook up my catch can properly to prevent that....)
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- New ITRCA Member
- Posts: 35
- Joined: November 14th, 2003, 1:06 pm
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
boost
according to the pressure sensor that my tuner used for datalogging, boost crept up to 11-11.5.....not what I expected, my boost gauge has never shown anything above 9Psig
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- Senior ITRCA Member
- Posts: 1029
- Joined: September 18th, 2002, 12:29 am
- Location: Cheyenne, WY
- Contact:
Not bad Jan...I can't see the video (56k ownage) I'll check it out at work. Do you have the dyno plot you can post? I'm interested in comparing it to mine.
2000 Turbo Integra Type R - 508whp/362lbs tq @ 21psi
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
-
- New ITRCA Member
- Posts: 3
- Joined: February 11th, 2004, 7:50 pm
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
dirty
I was waiting for that..I've had the car for over 4 years, and this is the first time it's seen salt. Friday was warm about 40 degrees a little rain, by Saturday morning it was about 20 degrees, all the rain froze and it snowed about 3 inches overnight, I waited a month for my dyno appointment, so I wasn't about to cancel, oh well, it will wash off...I was hoping for better weather, but it's Michigan....IWannaTypeR wrote:cars pretty dirty isnt it?
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
Re: dirty
don't worry jan I have more dents than a smashed pop can in my car. I wish I didn't have crap internet that way I could watch that vid. but again congrats on the #'s and for those who don't know the mustang dyno is more accuate than a dyno jet for real world numbers but always reads a bit lower...top end blitz made 317whp on a mustang dyno and 367whp on a dyno jet with only 2 psi difference in boost settingsJan Niemi wrote:I was waiting for that..I've had the car for over 4 years, and this is the first time it's seen salt. Friday was warm about 40 degrees a little rain, by Saturday morning it was about 20 degrees, all the rain froze and it snowed about 3 inches overnight, I waited a month for my dyno appointment, so I wasn't about to cancel, oh well, it will wash off...I was hoping for better weather, but it's Michigan....IWannaTypeR wrote:cars pretty dirty isnt it?
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
numbers
thanks, I'm very happy with the numbers, the powerband is so linear, and the torque curve flat - I know the MD shows lower numbers, but that's ok, that's what the dragstrip is for, I'm looking forward to April when the local strip opens over here so that I can go out and play a little..
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
-
- New ITRCA Member
- Posts: 35
- Joined: November 14th, 2003, 1:06 pm
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
how much
I think you can imagine....let's just say, way, way too much, but worth every penny!typer rick wrote:I would love to know about how much did you spend for your hole setup.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
Lol I can agree and fully understand
00' Turbo R<-----#167
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
-
- New ITRCA Member
- Posts: 35
- Joined: November 14th, 2003, 1:06 pm
Love the car, but aren't you scared someone would steal it. I hope you have a good alarm system for it. My friend and I are going to design some kind of alarm setup for the car if it works out I would keep it, but if it don't bye typeR . Love my typeR more than anything in the world but I just can't take the head-ache anymore. If the setup works I would only email typeR owners sorry other honda oweners, but to me If you don't own one your the enemy. I'm sorry I'm talking like this but I hate to hear ITR's getting stolen every minute.
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
not worried
It's not my daily driver, so it stays locked up in an undisclosed location that is very secure...not worried about it. Besides, I have insurance. I never go anywhere with the car if I know it will be parked from my field of vision.typer rick wrote:Love the car, but aren't you scared someone would steal it. I hope you have a good alarm system for it. My friend and I are going to design some kind of alarm setup for the car if it works out I would keep it, but if it don't bye typeR . Love my typeR more than anything in the world but I just can't take the head-ache anymore. If the setup works I would only email typeR owners sorry other honda oweners, but to me If you don't own one your the enemy. I'm sorry I'm talking like this but I hate to hear ITR's getting stolen every minute.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
Yeah i always park mine where I can see it. But I have a couple features that will make it pretty hard to still with out a tow truck.
00' Turbo R<-----#167
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
I just drive mine. if someone wants it bad enough they will get it. park in a well lit area and that is about all you can do
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
-
- New ITRCA Member
- Posts: 19
- Joined: March 9th, 2004, 8:53 pm
- Location: Somewhere, Texas
- Contact: