For you guys who are runnung a hondata system.
Does you car have a check engine light on when installling the system.
hondata
-
- Senior ITRCA Member
- Posts: 1029
- Joined: September 18th, 2002, 12:29 am
- Location: Cheyenne, WY
- Contact:
Not on mine...I'm running a OBD1 ecu tho and a missing link as well.
2000 Turbo Integra Type R - 508whp/362lbs tq @ 21psi
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
Hondata
Erik,
Why are you running a missing link with Hondata? Or are you joking?
Why are you running a missing link with Hondata? Or are you joking?
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
if you don't have a 3 bar map you can run a missing link
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
-
- Senior ITRCA Member
- Posts: 825
- Joined: November 19th, 2002, 1:04 pm
- Location: City of Boost
- Contact:
map
How is his ecu sensing boost, if not via a map sensor?
I run the stock map sensor, and the Hondata uses it to sense boost. It is good up to 11 to 11.5 psig.
I run the stock map sensor, and the Hondata uses it to sense boost. It is good up to 11 to 11.5 psig.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
for all of your tuning, parts, fabrication and other service needs.
Yeah mine is ran like Jan's but I have a obd2-obd1 harness and I'm using a p28 ecu. No missing link and no check engine light.
00' Turbo R<-----#167
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
All Stock B18c5
Full-Race t3/t67 powered
91' Civic 4dr
Beater
| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |