short shifter

hopofthese · Post by **hopofthese** » December 27th, 2002, 11:28 pm

whats up. i was just wondering whats a good shortshifter for the type r?
i was looking at the skunk 2, is that any good? what bushings should i use?

Post by **Trey** » December 27th, 2002, 11:37 pm

hopofthese wrote:whats up. i was just wondering whats a good shortshifter for the type r?
i was looking at the skunk 2, is that any good? what bushings should i use?

I have used some short shiters on my integras and for the Type-R I would actually recommend just installing Poly Urethane bushings. I use Energy Suspension Poly bushings and it makes the shift so much crisper. THe shift length on the R is just about perfect.

Just My opiniops.

As for Shifters get one made of steel. Neuspeed or Skunk 2 should work.

hopofthese · Post by **hopofthese** » December 27th, 2002, 11:42 pm

are u talking about energy suspension? is there anything else out there better?

Post by **Trey** » December 27th, 2002, 11:46 pm

hopofthese wrote:are u talking about energy suspension? is there anything else out there better?

Poly is poly and there isn't much you can do with the design of the shifter bushings. Best part is Energy Suspension only costs about $15 for the kit.

THis one isn't rocket science so don't try too hard to improve the wheel :p

ITRCA

short shifter

short shifter

Re: short shifter