Suspension Help!!!

UG-T · Post by **UG-T** » June 11th, 2006, 9:33 pm

I have a JDM honda Integra SIR

I bought a set of koni yellows but open the box to find tha the rear shocks uses a different lower mounting point than the one I got.

The one I got was the 'fork' type and mine is the other 'round' type.

Was wondering if someone could post the part number for the correct koni part for my car...or if the US R and the JDM R uses the same mounting point?

Pics of the US R rear shock would be alot of help....

Thanks in advance...

Dawn, Destroyer of Worlds · June 12th, 2006, 1:08 am

Did you order the parts for an SIR? Because there is no Integra SIR, but there is a civic SIR. (And an Integra XSI which shares the laters engine).
Maybe you got the wrong part. BTW, it's gonna be slow getting a response here, as every-one EXCEPT me (:roll:) is at Expo. Did you contact Koni?
Sorry I can't be of more help.

UG-T · Post by **UG-T** » June 12th, 2006, 7:37 pm

There is the SIR-G Integra (DC2)...

I got the part for the GSR....
After a loong while of searching I found some pics of the USDM ITR and the lower mounting point it the same 'box' type used on the SIR.

I asked my supplier to source this one and exchange it for me soooo, I'll let you all know what turns up.....

Thanks anyway...

Dawn, Destroyer of Worlds · June 12th, 2006, 8:28 pm

Well I stand corrected then.
Happy you're getting some results from your supplier.

UG-T · Post by **UG-T** » June 12th, 2006, 10:18 pm

yep...
will let you know how it turns out...

frozenb · Post by **frozenb** » June 14th, 2006, 10:31 pm

if you hv a jdm dc2, their rear low control arm all the same as the USDM type R,

one thing clear, all JDM EG, DC2, DB8 and DC2 R has the same eye ball joint lower control arm. they all share the same rear shocks

UG-T · Post by **UG-T** » June 17th, 2006, 6:12 pm

frozenb wrote:if you hv a jdm dc2, their rear low control arm all the same as the USDM type R,

one thing clear, all JDM EG, DC2, DB8 and DC2 R has the same eye ball joint lower control arm. they all share the same rear shocks

Thanks for the info man...

The type R's are on their way...should get them Monday

So happy to know that they will fit.

SerGTR · Post by **SerGTR** » June 23rd, 2006, 2:43 am

Was US version of factory stock ITR equipped with rear strut bar or only on front

Post by **Dave-ROR** » June 23rd, 2006, 11:02 am

SerGTR wrote:Was US version of factory stock ITR equipped with rear strut bar or only on front

Front only.