what you guys think? ... (new clutch)

Integra Type-R Discussion - Discuss general ITR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Locked
cory25
ITRCA Member
Posts: 112
Joined: April 14th, 2006, 9:41 pm

what you guys think? ... (new clutch)

Post by cory25 »

well its time for a new clutch, I ve herd you guys talk a good bit about wich ones to get. so I think I am goiing with the EXEDY ORGANIC clutch kit. I found it http://www.summitracing.com here's the part number : EAC-08-800B It's hard to tell if this will work on a type r, if someone could go there and look to make sure I am getting the thing that would be sweet. And I was going to put a new flywheel in as well, the EXEDY one is 9.46lbs what is the weight of the stock one?

If anyone has a better sugg on a diff clutch please let me know, my has no mods done and wont for a while.

Thanks
2001 R py#0025
Bbasso
Post Whore!!
Posts: 6571
Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:

Post by Bbasso »

stock FW is about 15.x lbs.

As for ordering from Summit, I do and never had a problem.

But you might want to check out the Expo sponsers and see what kind of deals can be had... If none of the sponsers can hook you up to your liking then try clutchcityonline.com. I have had 2 very good purchases thru them.
swed
Eva01
ITRCA Member
Posts: 76
Joined: August 15th, 2003, 10:23 am
Location: GA

Post by Eva01 »

Bbasso wrote:stock FW is about 15.x lbs.

As for ordering from Summit, I do and never had a problem.

But you might want to check out the Expo sponsers and see what kind of deals can be had... If none of the sponsers can hook you up to your liking then try clutchcityonline.com. I have had 2 very good purchases thru them.
I second Rob's recommendation of clutchcityonline.com FTW! Free shipping and a good price.

http://www.clutchcityonline.com/acura_r ... ntegra.htm

08-800B will work. All B-series clutches are interchangable.
cory25
ITRCA Member
Posts: 112
Joined: April 14th, 2006, 9:41 pm

Post by cory25 »

thanks ,at clutchcity it says that it comes with the pilot bearing, and the release bearing, the reson I am doing this is because I need a new throwout bearing, is that something that I need to buy from honda?
2001 R py#0025
Bbasso
Post Whore!!
Posts: 6571
Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:

Post by Bbasso »

Call them to make sure, But IIRC it comes with all that is needed.
clutchcityonline.com
Store Hours
Monday-Friday
8:00 AM - 5:00 PM EST

Phone
Toll Free (866) 762-5141
swed
cory25
ITRCA Member
Posts: 112
Joined: April 14th, 2006, 9:41 pm

Post by cory25 »

thanks so much for the help! so is it a big diff going from the stock flywheel to a 9.46lbs one?
2001 R py#0025
Bbasso
Post Whore!!
Posts: 6571
Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:

Post by Bbasso »

I went from stock to the Comptech 6.75lbs and was in heaven! If they made a lighter one I'd be first in line to buy.
swed
neo_
ITRCA Member
Posts: 345
Joined: June 7th, 2005, 1:47 pm
Location: South Florida

Post by neo_ »

Bbasso wrote:I went from stock to the Comptech 6.75lbs and was in heaven! If they made a lighter one I'd be first in line to buy.
How much fun did you have daily driving it?
Aquafina
produced by PepsiCo.
Posts: 42
Joined: February 13th, 2003, 2:37 am
Location: Johnson City, Tennessee

Post by Aquafina »

Hit me on email.

Chris@wd-r.com
Whoopee Doo Racing ITR EXPO 6,7,8,9 Sponsor
MFactory, Rocket Motorsports, Action Clutch, CP Pistons, Supertech
MFactory North American Installer
Bbasso
Post Whore!!
Posts: 6571
Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:

Post by Bbasso »

I actually have a lot of fun when I used to use the caR on the street.
swed
Aquafina
produced by PepsiCo.
Posts: 42
Joined: February 13th, 2003, 2:37 am
Location: Johnson City, Tennessee

Post by Aquafina »

I have a 7.5 pound Fidanza. Love it. Same as Rob, if I could go lighter I would (which I did, went from a sprung clutch to an unsprung, ~ 1 pound).
Whoopee Doo Racing ITR EXPO 6,7,8,9 Sponsor
MFactory, Rocket Motorsports, Action Clutch, CP Pistons, Supertech
MFactory North American Installer
SerGTR
ITRCA Member
Posts: 264
Joined: April 16th, 2006, 12:58 pm
Location: SoCal

?

Post by SerGTR »

Does lighter flywheel actually adds any power to wheels or it just makes car rev faster? Then how does it make car faster?... confused :roll: could never understand how it works
db8sirg
New ITRCA Member
Posts: 8
Joined: December 6th, 2004, 6:30 pm
Location: Louisville, Kentucky

Re: ?

Post by db8sirg »

SerGTR wrote:Does lighter flywheel actually adds any power to wheels or it just makes car rev faster? Then how does it make car faster?... confused :roll: could never understand how it works
just lets you rev faster. no one said anything about making more power with a lighten flywheel. where did you get that from?
cory25
ITRCA Member
Posts: 112
Joined: April 14th, 2006, 9:41 pm

Post by cory25 »

well the website for EXEDY says that there 9.46lb flywheel adds 42% more torque.
2001 R py#0025
Bbasso
Post Whore!!
Posts: 6571
Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:

Post by Bbasso »

Adds 42% more OR can handle 42% more ?
swed
cory25
ITRCA Member
Posts: 112
Joined: April 14th, 2006, 9:41 pm

Post by cory25 »

if you go to clutchcityonline.com it just has a colum that says TORQUE INCREASE 32% (sorry not 42)
2001 R py#0025
Bbasso
Post Whore!!
Posts: 6571
Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:

Post by Bbasso »

I think it referes to holds xx% more then stock. But I could be wrong, Why not call them and ask?
swed
cory25
ITRCA Member
Posts: 112
Joined: April 14th, 2006, 9:41 pm

Post by cory25 »

I tryed to call them but it just rang forever.
oh well ether way.
2001 R py#0025
Bbasso
Post Whore!!
Posts: 6571
Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:

Post by Bbasso »

I say try again with the call, I bet they are busy or busy eating lunch :lol:
swed
SerGTR
ITRCA Member
Posts: 264
Joined: April 16th, 2006, 12:58 pm
Location: SoCal

well

Post by SerGTR »

So how does fast reving goes into advantage, how does it make car faster? So is it possible to install Comptech 6.75lbs flywheel along with 4.9 Final Drive? I can't even imagine how fast car gona rev with this setup
Locked