Corner turn signal lights?

psychoBiLLy · Post by **psychoBiLLy** » July 15th, 2006, 2:28 am

my itr just got taxed for the corner lights. damn haters! but atleast they left me the bulbs and connectors. had to buy them from dealer $69 each!!! anyone got any ideas how to modify it so it won't get stolen. i was thinking about putting tamper proof torx instead of the regular philips screws. just wanted to know wat everyone else was doing?

Erik95LS · Post by **Erik95LS** » July 15th, 2006, 7:13 am

psychoBiLLy wrote:tamper proof

Theres no such thing.

Torx would be a good idea. Other than that I can't really think of anything other than trying to create some sort of other mounting point behind the light. Good luck.

Bbasso · Post by **Bbasso** » July 15th, 2006, 12:27 pm

from underneath look up at the way it clips in to place and maybe one of those small lugage locks would help?

psychoBiLLy · Post by **psychoBiLLy** » July 15th, 2006, 7:11 pm

actually there is a tamper proof torx. i work on german cars and we got lots of them. it looks like a regular torx but has a little wiener in the middle. thanks for the help though. gotta look in to it this weekend

Erik95LS · Post by **Erik95LS** » July 15th, 2006, 9:31 pm

psychoBiLLy wrote:actually there is a tamper proof torx. i work on german cars and we got lots of them. it looks like a regular torx but has a little wiener in the middle. thanks for the help though. gotta look in to it this weekend

my point is simply that nothing is tamper proof. if theres a way to put it together then theres a way to take it apart. I seriously doubt anyone would go through so much trouble for some turn signals though.

neo_ · Post by **neo_** » July 16th, 2006, 1:33 am

Erik95LS wrote: my point is simply that nothing is tamper proof. if theres a way to put it together then theres a way to take it apart.

Unless you use rivets...well you can drill those out....

psychoBiLLy · Post by **psychoBiLLy** » July 16th, 2006, 9:45 pm

thanks for all the help. i found some torx screws to replace the phillips.

Dave_B · Post by **Dave_B** » July 16th, 2006, 9:54 pm

Erik95LS wrote:
psychoBiLLy wrote:tamper proof
Theres no such thing.

Torx would be a good idea. Other than that I can't really think of anything other than trying to create some sort of other mounting point behind the light. Good luck.

No such thing? I beg to differ. I've seen many different head styles that most people don't have.

<---- used to work at a fastener warehouse...

Edit: And there not the "weiner" torx like the German guy said...

ITRCA

Corner turn signal lights?

Corner turn signal lights?

Re: Corner turn signal lights?

Re: Corner turn signal lights?

Re: Corner turn signal lights?

Re: Corner turn signal lights?

Re: Corner turn signal lights?