The OT place for OGs to BS w/o BS.

walker111 · Post by **walker111** » September 19th, 2006, 1:14 pm

Eirk is gonna steal the page!!

Dave_B · Post by **Dave_B** » September 19th, 2006, 1:14 pm

walker111 wrote:
Dave_B wrote:
walker111 wrote:haha lol
I've gotta fill out the novel of an application and get it back up to richmond today.
I see. Hurry u!!

Workin on it fool. I get my offer letter here shortly.

Erik95LS · Post by **Erik95LS** » September 19th, 2006, 1:14 pm

walker111 wrote:joo have already gone thru a block?

yeah, had an unexplained rod bearing failure that resulted in this Kinda big

After that most of mine was trash so I got a new short block from honda. My scuffed up crank is still sitting in the showroom window at P1.

Dave_B · Post by **Dave_B** » September 19th, 2006, 1:15 pm

walker111 wrote:Eirk is gonna steal the page!!

Not. I think he may have left too.

walker111 · Post by **walker111** » September 19th, 2006, 1:15 pm

Dave_B wrote:
walker111 wrote:Joo have been missing the discussion, I think rob got bored
I saw the pic of Honey I took from WTDR Expo. Oh the good times. Thanks again for lending me some floor space in that bish.

In 28 degree weather.... Honey > tent

lol, very good times!

So yea back to tuning...

Dave_B · Post by **Dave_B** » September 19th, 2006, 1:16 pm

walker111 wrote:
Dave_B wrote:
walker111 wrote:Joo have been missing the discussion, I think rob got bored
I saw the pic of Honey I took from WTDR Expo. Oh the good times. Thanks again for lending me some floor space in that bish.

In 28 degree weather.... Honey > tent
lol, very good times!

So yea back to tuning...

Yes back to tuning. If you don't go see Yack, who are you going to see. What do they prefer for tuning methods? I like the functionality of my S300 and the fact of datalogging on the fly via USB.

walker111 · Post by **walker111** » September 19th, 2006, 1:16 pm

Erik95LS wrote:
walker111 wrote:joo have already gone thru a block?
yeah, had an unexplained rod bearing failure that resulted in this Kinda big

After that most of mine was trash so I got a new short block from honda. My scuffed up crank is still sitting in the showroom window at P1.

Damn, what mileage was that at?

Bbasso · Post by **Bbasso** » September 19th, 2006, 1:17 pm

Had to take a shower... I'm of to do lunch, Brooklyn Style

walker111 · Post by **walker111** » September 19th, 2006, 1:17 pm

walker111 wrote:http://www.brauningmotorsports.com/

Here Dave. They are big in drag...

Dave_B · Post by **Dave_B** » September 19th, 2006, 1:17 pm

I'm looking for a block of some sort to build. Either B18C1 or C5

Also, if any of joo fools come across or know somebody selling a mint 98+ Black GS-R LMK. I'm in the market for one.

walker111 · Post by **walker111** » September 19th, 2006, 1:18 pm

Bbasso wrote:Had to take a shower... I'm of to do lunch, Brooklyn Style

Lucky bastid!!!

Erik95LS · Post by **Erik95LS** » September 19th, 2006, 1:18 pm

walker111 wrote:
Erik95LS wrote:
walker111 wrote:joo have already gone thru a block?
yeah, had an unexplained rod bearing failure that resulted in this Kinda big

After that most of mine was trash so I got a new short block from honda. My scuffed up crank is still sitting in the showroom window at P1.
Damn, what mileage was that at?

60k. I got it at 42k, but I think one of the previous owners may have forgotten than these things need oil. It let go on the back straight of Mid-Ohio on my first session of the first day of a 2 day event. Not fun.

Dave_B · Post by **Dave_B** » September 19th, 2006, 1:18 pm

walker111 wrote:
walker111 wrote:http://www.brauningmotorsports.com/
Here Dave. They are big in drag...

Seems like they prefer Hondata. They even sell the stuff.

Bbasso · Post by **Bbasso** » September 19th, 2006, 1:19 pm

chicken parmesan hero, yummie

Dave_B · Post by **Dave_B** » September 19th, 2006, 1:19 pm

Erik95LS wrote:
walker111 wrote:
Erik95LS wrote:
walker111 wrote:joo have already gone thru a block?
yeah, had an unexplained rod bearing failure that resulted in this Kinda big

After that most of mine was trash so I got a new short block from honda. My scuffed up crank is still sitting in the showroom window at P1.
Damn, what mileage was that at?
60k. I got it at 42k, but I think one of the previous owners may have forgotten than these things need oil. It let go on the back straight of Mid-Ohio on my first session of the first day of a 2 day event. Not fun.

Talk about suck ass timing. Damn dood. I would have been pissed.

walker111 · Post by **walker111** » September 19th, 2006, 1:19 pm

Dave_B wrote:
walker111 wrote:
walker111 wrote:http://www.brauningmotorsports.com/
Here Dave. They are big in drag...
Seems like they prefer Hondata. They even sell the stuff.

Yea but they will be tuning my vafc. If I go Hondata, either yack or Steve will tune my car.

Erik95LS · Post by **Erik95LS** » September 19th, 2006, 1:19 pm

Bbasso wrote:chicken parmesan hero, yummie

oh man, that sounds good.

walker111 · Post by **walker111** » September 19th, 2006, 1:20 pm

Erik95LS wrote:
walker111 wrote:
Erik95LS wrote:
walker111 wrote:joo have already gone thru a block?
yeah, had an unexplained rod bearing failure that resulted in this Kinda big

After that most of mine was trash so I got a new short block from honda. My scuffed up crank is still sitting in the showroom window at P1.
Damn, what mileage was that at?
60k. I got it at 42k, but I think one of the previous owners may have forgotten than these things need oil. It let go on the back straight of Mid-Ohio on my first session of the first day of a 2 day event. Not fun.

I'd be slightly preterbed....

Bbasso · Post by **Bbasso** » September 19th, 2006, 1:20 pm

I'll bring the camera out for a few shots

I'll catch you guys later.

Dave_B · Post by **Dave_B** » September 19th, 2006, 1:20 pm

Erik95LS wrote:
Bbasso wrote:chicken parmesan hero, yummie
oh man, that sounds good.

x2

Jim, go Hondata. I've only heard headaches with the VAFC.

walker111 · Post by **walker111** » September 19th, 2006, 1:21 pm

Bbasso wrote:I'll bring the camera out for a few shots

I'll catch you guys later.

Peace!

Erik95LS · Post by **Erik95LS** » September 19th, 2006, 1:22 pm

Dave_B wrote:
Talk about suck ass timing. Damn dood. I would have been pissed.

yeah I wasn't in a very good mood after that. Not to metion it was 3 weeks before Expo 5. I went with the quickest route to resolution and just took it to Jack.

Jim, I know Jack isn't a fan of it (hates it actually) and has turned people away in the past so you might want to check with him about his feelings about tuning with hondata.

walker111 · Post by **walker111** » September 19th, 2006, 1:22 pm

Dave_B wrote:
Erik95LS wrote:
Bbasso wrote:chicken parmesan hero, yummie
oh man, that sounds good.
x2

Jim, go Hondata. I've only heard headaches with the VAFC.

I will eventually but not right now. The vafc is hooked up but just sitting there. I should atleast get some sort of tune on it...

walker111 · Post by **walker111** » September 19th, 2006, 1:23 pm

Erik95LS wrote:
Dave_B wrote:
Talk about suck ass timing. Damn dood. I would have been pissed.
yeah I wasn't in a very good mood after that. Not to metion it was 3 weeks before Expo 5. I went with the quickest route to resolution and just took it to Jack.

Jim, I know Jack isn't a fan of it (hates it actually) and has turned people away in the past so you might want to check with him about his feelings about tuning with hondata.

That sucks dodo, I'll have to figure out whos tuning before I buy....

Erik95LS · Post by **Erik95LS** » September 19th, 2006, 1:23 pm

walker111 wrote:
Erik95LS wrote:
60k. I got it at 42k, but I think one of the previous owners may have forgotten than these things need oil. It let go on the back straight of Mid-Ohio on my first session of the first day of a 2 day event. Not fun.
I'd be slightly preterbed....

yeah, at least the previous owner was one of my best friends so everytime I have any type of problem with anything on my car I just blame him