Odd question for all of you JDM fans... 'transmission'
-
- Post Whore!!
- Posts: 6571
- Joined: September 25th, 2002, 1:21 am
- Location: South Carolina !
- Contact:
Odd question for all of you JDM fans... 'transmission'
How hard or easy it it to buy a new JDM transmission?
and if you know a place that has them, post up!
and if you know a place that has them, post up!
swed
Why a jdm itr trans? just wondering.Erik95LS wrote:Thats why I always keep bolt cutters and a small amount of plastic explosive in my car.knowledge wrote:People hold on to these tighter than a virgin's chastity belt key!
You can... get a gsr trans, put a 4.785 FD in it, if you are really nutso, you can put itr 1-2-3 in it.
Or.. usdm trans, change 4-5 and get a 4.785 FD.
JDM Trans are hard to find... JDM GSR trans is the same ratios IIRC. Some jdm gsr have fd, some don't.
i realize that would not be NEW, but i honestly cannot recall ever seeing a NEW jdm itr trans for sale. ever.
new trans? dont you mean you'll need to rebuild it, new syncros, etc?Bbasso wrote:Because I also have never seen a new one for sale and in time I'll need a tranny for pos. And since this seems to be a hard item to find... I'd start asking now.Chris N wrote:
Why a jdm itr trans? just wondering.
i would be easier to build yours to jdm itr trans spec than to find a new jdm itr trans. :shrug:
-
- Half way to a cool title.
- Posts: 3542
- Joined: April 2nd, 2006, 9:26 pm
- Location: Buffalo, NY
Does Honda even make JDM ITR transmissions anymore? I know here in the US, automakers must make/provide parts for vehicles for like 10 years afterwards, but does Japan have a similar law? Perhaps you could check with one of the Expo sponsors who import from Japan, like King Motorsports. They may have someone over in Japan who could pick one up from Honda, or some other place, and ship it over. That's where I would start
<--- Intrigued by this quest and in for an answer.
<--- Intrigued by this quest and in for an answer.
-Joe - ITR RegistRar
98-0309...Born 1/22/1998.
ITR Expo!
98-0309...Born 1/22/1998.
ITR Expo!
Being that the USDM ITR's were shipped over here from Japan. Then the USDM tranny's were/are manufactured in Japan. I know where to get new USDM ITR tranny's for 1600-1800. Not JDM one's though...
2000 ITR #00-0124
Old crappy Civic- $300
Nitrous kit- $500
Blowing your motor when attempting to run a Type-R- PRICELESS!!!
Old crappy Civic- $300
Nitrous kit- $500
Blowing your motor when attempting to run a Type-R- PRICELESS!!!
LOL. Is this for reasons found here?
http://www.honda-tech.com/zerothread/1769284
What I would do is contact Reid and ask him. He'd know just how to get ahold of a new one. Your gonna get butt raped on price though. Trans plus over seas shipping on that are gonna be a biotch.
http://www.honda-tech.com/zerothread/1769284
What I would do is contact Reid and ask him. He'd know just how to get ahold of a new one. Your gonna get butt raped on price though. Trans plus over seas shipping on that are gonna be a biotch.
BTW, I just PM'd him... It went as follows...
Seems like the JDM trans blitz isn't just here on HT...
Little help for the old bald guy?
vi...60202
Seems like the JDM trans blitz isn't just here on HT...
Little help for the old bald guy?
vi...60202
-
- Post Whore!!
- Posts: 6571
- Joined: September 25th, 2002, 1:21 am
- Location: South Carolina !
- Contact:
Ya better watch itDave_B wrote:BTW, I just PM'd him... It went as follows...
Seems like the JDM trans blitz isn't just here on HT...
Little help for the old bald guy?
vi...60202
and that link... what gives? It goes to the Expo7 page.
swed
Watch what? Is it going to dance? Or maybe pass out money?Bbasso wrote:Ya better watch itDave_B wrote:BTW, I just PM'd him... It went as follows...
Seems like the JDM trans blitz isn't just here on HT...
Little help for the old bald guy?
vi...60202
and that link... what gives? It goes to the Expo7 page.
WTF? Why does it go to the expo seven page, I CTRL+C and CTRL+V'd it. Hrm. Dunno.
It's an improper link. Dave made it:Dave_B wrote:Watch what? Is it going to dance? Or maybe pass out money?Bbasso wrote:Ya better watch itDave_B wrote:BTW, I just PM'd him... It went as follows...
Seems like the JDM trans blitz isn't just here on HT...
Little help for the old bald guy?
vi...60202
and that link... what gives? It goes to the Expo7 page.
WTF? Why does it go to the expo seven page, I CTRL+C and CTRL+V'd it. Hrm. Dunno.
Code: Select all
http://www.itrca.com/forums/vi...60202
Code: Select all
http://www.itrca.com/forums/viewforum.php?f=xxxx
or
http://www.itrca.com/forums/viewtopic.php?p=xxxx#xxxx
that link looks like it came from h-t or a site that shortens linked text.
if you have [url = http://blah blah blah ] and the linked text is the same as the url, if over a certain length it will shorten the text you see.
i highly doubt someone did that intentionally, looks like a copied / pasted link from h-t.
if you have [url = http://blah blah blah ] and the linked text is the same as the url, if over a certain length it will shorten the text you see.
i highly doubt someone did that intentionally, looks like a copied / pasted link from h-t.
All I hear is blah blah blah. It wasn't the edited post, I closed the link and then came back to it and once I came back to it, I clicked the thread and then copied the link at the top. So you mean to tell me I can't do that? I totally understand the edited or temp ones when you post a reply and how all that won't work, but knowing that I left the thread, then went to another and then back to it to copy the link just as I always do. :shrug:
-
- Banjo Viking
- Posts: 6268
- Joined: May 11th, 2003, 1:54 pm
- Location: Where rock is criminal......criminals rock!
This link was sent to me by someone over there. He said he used to use this place to get all kinds of OEM jdm honda parts.
http://www.j-garage.com/
http://www.j-garage.com/
-Erik
"i sneezed and jam came out" - R-Box
"i sneezed and jam came out" - R-Box
-
- Post Whore!!
- Posts: 6571
- Joined: September 25th, 2002, 1:21 am
- Location: South Carolina !
- Contact:
While I don't see what I'm looking for. I came across this bit of info:
But thanks you for helping out!
integra type r dc2
integra type r1995. 9 : Honda announced the release of the Honda DC2 Integra type R that features enhanced driving performance. Type-R stands for Racing. The Honda Integra type R is powered by the B18C 1.8 liter DOHC VTEC engine, specifically developed for the Honda Integra type-R, with 200 horsepower at 8000rpm (111PS/liter). The 4 door hard-top and the 3 door coupe are available. Standard equipment includes a Helical LSD, performance rods, hard type suspension, a front lip spoiler, a rear spoiler, alloy wheels, a leather wrapped MOMO steering wheel, RECARO seats, and a titanium shift knob.
1998. 1 : There were some minor changes. To enable the higher torque at low and mid rpm levels, exhaust performance has been improved by employing the equal-length 4-in-1 style stainless steel exhaust manifold. And suspension and brakes have been improved to maximize driving performance and handling. Tire size is increased to 215/45ZR16. Furthermore, the Integra type R 98 Spec adopts 15-inch front disk brakes, 14-inch rear disk brakes, newly designed 5-hole 16-inch alloy wheels, completely retuned suspension, SRS airbag-compatible steering wheel designed by MOMO, High Intensity Discharge (HID) headlights with twice the brightness of halogen lamps.
1999.7 : The serial number stamp which shows the order of manufacture is started.
1999.12 : The Honda Integra type-Rx was added to the Integra type-R series. The Honda Integra type-Rx features body colored retractable electric door mirrors, keyless entry unlock system, a digital quartz clock, privacy glass( rear quarter right/rear window), aluminum sports pedals, air conditioning, and power antenna.
swed
geez rob ur trans is still having probs?
found one going on ebay after searching
http://cgi.ebay.com/ebaymotors/JDM-97-I ... enameZWD1V
gl man, hope u still will be in the hole by expo 7
found one going on ebay after searching
http://cgi.ebay.com/ebaymotors/JDM-97-I ... enameZWD1V
gl man, hope u still will be in the hole by expo 7
I know what ur looking for Rob, but, my trans was used and it came in alot better shape than my stock one. I know its a risk period, but I'm beginning to doubt the possibility of getting a brand new. Have we heard back from Reid?Bbasso wrote:$2000 is w/o the lube?
Reason for me saying that... Here
It's true I'm looking for a new jdm tranny, but it seems to be rather hard to find