WTB - ITR C/F interior trim

ninetails · Post by **ninetails** » August 15th, 2007, 11:21 am

i know its a long shot

..

but i need

from 98-01 ITR(oem parts)

the driver side A/C vent (C/F)
the console around teh shifter(C/F)
the cupholder and ashtray console (C/F)
driver side doorpanel, the window control console (C/F)

and the oem itr clock if possible!!!

nautica_t · Post by **nautica_t** » August 15th, 2007, 6:43 pm

driverside door panel?

just so you know they didn't come with an oem cf door panel.

and the window switches are only on JDM vehicles not usdm, so modifications are required to fit the JDM switches on to the USDM switch.

but on a side note, i have an oem ashtray in CF if you're interested.

50 shipped?

elambz · Post by **elambz** » August 15th, 2007, 8:08 pm

nautica_t wrote: so modifications are required to fit the JDM switches on to the USDM switch.

You can just put the JDM part into the USDM door panels. I've got JDM door panels with USDM window switches, so it'll go the other way too.

gprotein · Post by **gprotein** » August 15th, 2007, 11:09 pm

eluam wrote:
nautica_t wrote: so modifications are required to fit the JDM switches on to the USDM switch.
You can just put the JDM part into the USDM door panels. I've got JDM door panels with USDM window switches, so it'll go the other way too.

JDM CF door panels? got some pics?

ninetails · Post by **ninetails** » August 16th, 2007, 1:55 pm

i figured that the c/f window controler only came in jdm models..

i have a guy that imports jdm parts.. mention he had some.. but told me they wont fit my car.. .. so i never really insisted for him to pull em out for me..

but.. now that its confirmd.. goin there this saturday..!! XD

I already have a CF ash tray... thanks though

elambz · Post by **elambz** » August 16th, 2007, 5:59 pm

gprotein wrote:
eluam wrote:
nautica_t wrote: so modifications are required to fit the JDM switches on to the USDM switch.
You can just put the JDM part into the USDM door panels. I've got JDM door panels with USDM window switches, so it'll go the other way too.
JDM CF door panels? got some pics?

No, he's only looking for the CF window switch parts and thats what I was talking about.

coolhandluke · Post by **coolhandluke** » August 17th, 2007, 1:24 pm

I have the following CF parts:

-DR vent
-Climate
-Shifter consolue
-Ashtray
-Cupholder
-and ITR clock

I was not looking to sell, but it would help fund my rebuild so I would be open to offers.

nautica_t · Post by **nautica_t** » August 17th, 2007, 11:01 pm

the jdm cf door switches need to be modified a bit, otherwise your auto down won't work properly, it needs to be dremeled a bit on the inside since the opening for auto down on rhd vehicle is on the right side.

how i know?
cause i have them installed.