Went to NE Dragway Friday

Discuss HPDE, wheel to wheel, autocross, rally, rally-cross, drag racing topics here.
Locked
captainzorg
ITRCA Member
Posts: 92
Joined: January 7th, 2003, 6:59 pm
Location: NH

Went to NE Dragway Friday

Post by captainzorg »

I went to New England Dragway Friday. First time this year and first time with my new mods.

DC JDM Header
Carsound cat
AEM CAI

I ran a 15.08 @ 92.7 MPH
and a 15.17 @ 93.2 MPH

Both with REALLY BAD wheel hop!!!
I was hoping to run a 14.7-14.8 I'm sure I will hit it next week. I had 3/4 of a tank of gas. I don't think that makes a huge difference. I didn't drop the pressure in my tires. Brigestone Potenzas 195/55/R15 Pole Position's
I got the Mods done a few days ago and I am still adjusting to the differences. I used to run Between 15.2-15-5
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

times

Post by Jan Niemi »

What 60 foot? If you want any kind of traction out of the hole on street tires, don't burnout, and make sure your tire pressure is between 15 and 20, start at 20, and work your way down until you find the sweet spot.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
captainzorg
ITRCA Member
Posts: 92
Joined: January 7th, 2003, 6:59 pm
Location: NH

Post by captainzorg »

R/T .573
60' 2.571
330 6.563
1/8 9.845
MPH 75.96
1000 12.678
1/4 15.081
MPH 92.00

I did a burnout before. I need to practice my launch so I minimize wheel hop.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

no burnout

Post by Jan Niemi »

I repeat, do not do a burnout with those tires, it will not do you any good, and lower the pressure.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Sick TR
New ITRCA Member
Posts: 43
Joined: January 31st, 2003, 10:13 pm
Location: Oregon
Contact:

Post by Sick TR »

I'm pury sure that you can do, what you want to do 14.7-14.8. because my best time is 14.6 and the only mod that I have is= JDM Header and CAI.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

Post by Jan Niemi »

sick tr wrote:I'm pury sure that you can do, what you want to do 14.7-14.8. because my best time is 14.6 and the only mod that I have is= JDM Header and CAI.
What? I cannot decipher this jibberish.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Sick TR
New ITRCA Member
Posts: 43
Joined: January 31st, 2003, 10:13 pm
Location: Oregon
Contact:

Post by Sick TR »

Jan Niemi wrote:
sick tr wrote:I'm pury sure that you can do, what you want to do 14.7-14.8. because my best time is 14.6 and the only mod that I have is= JDM Header and CAI.
What? I cannot decipher this jibberish.
Serious Sh-t dude.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

What

Post by Jan Niemi »

I think your thought processes are probably in place, and in your mind you know what you want to say, but writing it down is just giving you some problems.

So what is it that you want to say?
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Locked