Page 551 of 1582
Posted: September 27th, 2006, 2:34 pm
by Chris N
Well first there is a problem.
ITRCA avatars need to be 60x60 pixels max. Your h-t avatar is 70x63.
Second, if it were the correct size (easy to fix), you could re-upload the smaller sized one to h-t.
Then copy the image location (
http://www.honda-tech.com/zeroavatar/145754) and go to your profile on ITRCA. towards the bottom it says "Upload Avatar from a URL" paste in that URL and press submit.
Posted: September 27th, 2006, 2:35 pm
by canuckr
Chris N wrote:Well first there is a problem.
ITRCA avatars need to be 60x60 pixels max. Your h-t avatar is 70x63.
Joo should fixed that little problem...
I had to resize mine... What a pain in the arse..
Posted: September 27th, 2006, 2:36 pm
by Chris N
canuckr wrote:Chris N wrote:Well first there is a problem.
ITRCA avatars need to be 60x60 pixels max. Your h-t avatar is 70x63.
Joo should fixed that little problem...
I had to resize mine... What a pain in the arse..
yea right. you do it
i resized it and put joo avatar up jim
Posted: September 27th, 2006, 2:36 pm
by walker111
Chris N wrote:Well first there is a problem.
ITRCA avatars need to be 60x60 pixels max. Your h-t avatar is 70x63.
Second, if it were the correct size (easy to fix), you could re-upload the smaller sized one to h-t.
Then copy the image location (
http://www.honda-tech.com/zeroavatar/145754) and go to your profile on ITRCA. towards the bottom it says "Upload Avatar from a URL" paste in that URL and press submit.
I knew it was slightly too big, I thought you might have a high speed way of fixing it...
Posted: September 27th, 2006, 2:38 pm
by Chris N
I resized it at high speed
Posted: September 27th, 2006, 2:41 pm
by walker111
Chris N wrote:I resized it at high speed
lol, fucking sweet!!!! No one could do it the last time I asked!!! Not even the midget!!!
Thanks doood!
Posted: September 27th, 2006, 2:49 pm
by Chris N
walker111 wrote:Chris N wrote:I resized it at high speed
lol, fucking sweet!!!! No one could do it the last time I asked!!! Not even the midget!!!
Thanks doood!
Dumbasses
Posted: September 27th, 2006, 2:51 pm
by walker111
Chris N wrote:walker111 wrote:Chris N wrote:I resized it at high speed
lol, fucking sweet!!!! No one could do it the last time I asked!!! Not even the midget!!!
Thanks doood!
Dumbasses
Posted: September 27th, 2006, 3:00 pm
by Erik95LS
Just put my seat in. I love it. Gained close to 4inches of headroom
Posted: September 27th, 2006, 3:02 pm
by walker111
Erik95LS wrote:Just put my seat in. I love it. Gained close to 4inches of headroom
O'rlly? Pics, what rails? I saw the cobra seat...
Posted: September 27th, 2006, 3:04 pm
by Doespike
walker111 wrote:Erik95LS wrote:Just put my seat in. I love it. Gained close to 4inches of headroom
O'rlly? Pics, what rails? I saw the cobra seat...
Yes, pics, now
Posted: September 27th, 2006, 3:09 pm
by Erik95LS
walker111 wrote:Erik95LS wrote:Just put my seat in. I love it. Gained close to 4inches of headroom
O'rlly? Pics, what rails? I saw the cobra seat...
I got the memory fab rails. They seem more than sturdy/well-made enough so far. I was also considering the Vision ones, but you have to buy those as a set and so far I only have the one seat. They're both the same price though and I think may actually be the same piece.
I'll get pics up after I get back from class. I'm sitting on the floorright now. Maybe a bit lower than the Mugen S1s, so I might raise it slightly. I love it so far though.
Posted: September 27th, 2006, 3:13 pm
by walker111
Erik95LS wrote:walker111 wrote:Erik95LS wrote:Just put my seat in. I love it. Gained close to 4inches of headroom
O'rlly? Pics, what rails? I saw the cobra seat...
I got the memory fab rails. They seem more than sturdy/well-made enough so far. I was also considering the Vision ones, but you have to buy those as a set and so far I only have the one seat. They're both the same price though and I think may actually be the same piece.
I'll get pics up after I get back from class. I'm sitting on the floorright now. Maybe a bit lower than the Mugen S1s, so I might raise it slightly. I love it so far though.
Any way you can use an aftermarket rail with the stock seats?
Posted: September 27th, 2006, 3:14 pm
by walker111
As many pictures as joo take you shouldnt be saying you did anything to ur car without taking pics!
Posted: September 27th, 2006, 3:14 pm
by Erik95LS
walker111 wrote:
Any way you can use an aftermarket rail with the stock seats?
Not really. I can't see any way to modify the stock ones either. I was originally going to make my own rails forthese out of some spare stock ones.
Posted: September 27th, 2006, 3:15 pm
by Erik95LS
walker111 wrote:As many pictures as joo take you shouldnt be saying you did anything to ur car without taking pics!
haha....shutup
Posted: September 27th, 2006, 3:15 pm
by walker111
Erik95LS wrote:walker111 wrote:
Any way you can use an aftermarket rail with the stock seats?
Not really. I can't see any way to modify the stock ones either. I was originally going to make my own rails forthese out of some spare stock ones.
Damn, what did joo pay for everything?
Posted: September 27th, 2006, 3:17 pm
by walker111
Did you ever have a prob with ur head hitting the rol bar?
Posted: September 27th, 2006, 3:18 pm
by Erik95LS
walker111 wrote:Erik95LS wrote:walker111 wrote:
Any way you can use an aftermarket rail with the stock seats?
Not really. I can't see any way to modify the stock ones either. I was originally going to make my own rails forthese out of some spare stock ones.
Damn, what did joo pay for everything?
the rails were $145 plus about $8-10 shipping. TheseatI got used for $400 shipped. Normally about $700+ This is the seat I've been wanting for a long time too. Most comfortable I've ever sat in. Right up there with the SPG, but this is a bit more roomy.
Posted: September 27th, 2006, 3:18 pm
by Erik95LS
walker111 wrote:Did you ever have a prob with ur head hitting the rol bar?
rollbar no, but door frame yes.
Ooops, gotta run. Later
Posted: September 27th, 2006, 3:19 pm
by walker111
Erik95LS wrote:walker111 wrote:Erik95LS wrote:walker111 wrote:
Any way you can use an aftermarket rail with the stock seats?
Not really. I can't see any way to modify the stock ones either. I was originally going to make my own rails forthese out of some spare stock ones.
Damn, what did joo pay for everything?
the rails were $145 plus about $8-10 shipping. TheseatI got used for $400 shipped. Normally about $700+ This is the seat I've been wanting for a long time too. Most comfortable I've ever sat in. Right up there with the SPG, but this is a bit more roomy.
Does the seat rattle at all?
Posted: September 27th, 2006, 3:19 pm
by Erik95LS
walker111 wrote:
Does the seat rattle at all?
not so far
Posted: September 27th, 2006, 3:19 pm
by walker111
Erik95LS wrote:walker111 wrote:Did you ever have a prob with ur head hitting the rol bar?
rollbar no, but door frame yes.
Ooops, gotta run. Later
My head hits the rool bar
Posted: September 27th, 2006, 3:32 pm
by Doespike
Graduate business school class: $4000
Gas for 140 mile roundtrip: $15
Valentine 1: $406
Road trip in Lucy: priceless!
Have a good one guys!
Posted: September 27th, 2006, 3:38 pm
by Chris N
Doespike wrote:Graduate business school class: $4000
Gas for 140 mile roundtrip: $15
Valentine 1: $406
Road trip in Lucy: priceless!
Have a good one guys!
dag