The OT place for OGs to BS w/o BS.

walker111 · Post by **walker111** » October 23rd, 2006, 2:31 pm

Erik95LS wrote:
walker111 wrote:

This the mothers stuff?
Yep, I perfer the tin also as opposed to the liquid stuff. Easier to apply and lasts a little better.

So, you like the paste better than the liquid? I usually like the liquid better, then again, its been a longgg time since I've used the paste...

walker111 · Post by **walker111** » October 23rd, 2006, 2:32 pm

Rob, what diff in the tails? the tinted part?

walker111 · Post by **walker111** » October 23rd, 2006, 2:33 pm

Bbasso wrote:Jim, Just call me.

I'll try to call ya when I go to lunch!

Bbasso · Post by **Bbasso** » October 23rd, 2006, 2:33 pm

Bbasso · Post by **Bbasso** » October 23rd, 2006, 2:33 pm

okkie dokkie

walker111 · Post by **walker111** » October 23rd, 2006, 2:34 pm

Bbasso wrote:yup

Looks pretty good. Inside or the outside?

Erik95LS · Post by **Erik95LS** » October 23rd, 2006, 2:36 pm

first snow flurries of the year here.

Post by **Doespike** » October 23rd, 2006, 2:54 pm

Erik95LS wrote:Joe, the ground areound your car does not look like early summer

LOL, yeah, that was Feb when I pounded out the fender. The front most was pushed inward a good inch. The after pic was early summer

Bbasso · Post by **Bbasso** » October 23rd, 2006, 2:56 pm

it's static cling stuff on the outside...

Ehh... I bet it will blow off on the first 100mph run I make

And you guys, Stop talking about snow!!! I hate it.

Post by **Doespike** » October 23rd, 2006, 3:04 pm

Bbasso wrote:
walker111 wrote:<going to detail the R this weekend like its never been detailed.
Come to Brooklyn or pay for me to come to you. I'll hook that R up like no other can.

(Brooklyn pizza and all sorts of good food)

We still require before and after pics

walker111 · Post by **walker111** » October 23rd, 2006, 3:07 pm

Doespike wrote:
Bbasso wrote:
walker111 wrote:<going to detail the R this weekend like its never been detailed.
Come to Brooklyn or pay for me to come to you. I'll hook that R up like no other can.

(Brooklyn pizza and all sorts of good food)
We still require before and after pics

lol, Rob is going to do my ride yO. I will prob still play around with the stuff I bought though. But I will still take pics of both!

walker111 · Post by **walker111** » October 23rd, 2006, 3:07 pm

Erik95LS wrote:first snow flurries of the year here.

favorites....weather.com

walker111 · Post by **walker111** » October 23rd, 2006, 3:09 pm

walker111 wrote:
Erik95LS wrote:first snow flurries of the year here.

favorites....weather.com

No snow scheduled for me...

Erik95LS · Post by **Erik95LS** » October 23rd, 2006, 3:13 pm

walker111 wrote:
Erik95LS wrote:first snow flurries of the year here.

favorites....weather.com

same here.

Dave_B · Post by **Dave_B** » October 23rd, 2006, 4:07 pm

Erik95LS wrote:
Dave_B wrote:<---- Almost "looped" the S last night. I think's me needs some new rear tires.
What'd you do?

LOL. Well, actually I had a nail in the LR tire and was low on tire pressure. I stopped at a stop sign to turn right, there was a very little puddle on the ground that got the rear tire wet. Between low PSI in the tire and the little bit of wetness, she came around suprisingly. Not all the way, but enough to go DAMN.

Dave_B · Post by **Dave_B** » October 23rd, 2006, 4:09 pm

Doespike wrote:
walker111 wrote:I think I replied to everyone....

<thinks you can fit more than 3 bucks on the hood of an s2000...
LOL, even more with a hardtop. God, I'd kill for a pic of that

I plan on attempting to put a few surfboards on a soft rack for the beach. I'll have pics of that sometime this winter/spring.

Dave_B · Post by **Dave_B** » October 23rd, 2006, 4:14 pm

Jim, when I got the S I:

1. Washed
2. Removed old wax in the cracks with an old toothbrush
3. 1st coat of "wax" (I used the meguires 3 step first is the cleaner wax)
4. 2nd coat of "wax" (This is the polishing stage)
5. 3rd coat of "wax" (this seals and gives the shine)
6. Tire cleaner

I still have not touched the interior.

walker111 · Post by **walker111** » October 23rd, 2006, 4:18 pm

Dave_B wrote:Jim, when I got the S I:

1. Washed
2. Removed old wax in the cracks with an old toothbrush
3. 1st coat of "wax" (I used the meguires 3 step first is the cleaner wax)
4. 2nd coat of "wax" (This is the polishing stage)
5. 3rd coat of "wax" (this seals and gives the shine)
6. Tire cleaner

I still have not touched the interior.

So you used the same wax 3 times?

Dave_B · Post by **Dave_B** » October 23rd, 2006, 4:27 pm

walker111 wrote:
Dave_B wrote:Jim, when I got the S I:

1. Washed
2. Removed old wax in the cracks with an old toothbrush
3. 1st coat of "wax" (I used the meguires 3 step first is the cleaner wax)
4. 2nd coat of "wax" (This is the polishing stage)
5. 3rd coat of "wax" (this seals and gives the shine)
6. Tire cleaner

I still have not touched the interior.
So you used the same wax 3 times?

Nope, BRB. I'll get you a pic of what I use.

Dave_B · Post by **Dave_B** » October 23rd, 2006, 4:37 pm

Here's ya go Jim.

And the 3 step wax's. I've always been a meguires fan myself.

Post by **98 CW ITR 322** » October 23rd, 2006, 4:39 pm

That's what I was using. The 3 stage Meg. It's like a cleaner, a polisher, and a wax. By the time I was done, my knuckles were dragging on teh ground.

Chris N · Post by **Chris N** » October 23rd, 2006, 4:42 pm

I just want to point out how gay tire shine is.

Chris N · Post by **Chris N** » October 23rd, 2006, 4:43 pm

98 CW ITR 322 wrote:By the time I was done, my knuckles were dragging on teh ground.

i only got through step 1.... i needs to go buy step 2 (for some reason all i had left with 1 and 3)

i was p00ped after 1 step!

Post by **98 CW ITR 322** » October 23rd, 2006, 4:48 pm

Chris N wrote:
98 CW ITR 322 wrote:By the time I was done, my knuckles were dragging on teh ground.
i only got through step 1.... i needs to go buy step 2 (for some reason all i had left with 1 and 3)

i was p00ped after 1 step!

I wank off alot.

walker111 · Post by **walker111** » October 23rd, 2006, 4:51 pm

I think that close to what I will be using.... Actually....

Smooth surface Clay Kit:

Heavy Cut Clay:

BSP Hand Polish: