Page 2 of 2
Posted: August 12th, 2003, 7:21 am
by Trey
all integras except R's also came with the crappy michelins
Posted: August 12th, 2003, 7:45 am
by e r i c s 9 9 s i
Jan Niemi wrote:
Sorry, the above mislead me, "Were you using stock R tires as well?"
Treys already posted that his tires were Falkens...
"I was on Azenis at 20 psi. Pulled 2.1 60's"
Re: 1/4 mile times
Posted: August 16th, 2003, 1:37 am
by e r i c s 9 9 s i
Well my times definately improved tonight... Still got more room for improvement. I was running my tire pressure at 13psi tonight and the guy running the burnout box said I'd pull 13.5's all night long if I raised the pressure to 18psi...so I'll play with the pressure more next week.
R/T: .499
60': 1.883
330: 5.666
1/8: 8.812
MPH: 78.46
1000: 11.538
1/4: 13.795
MPH: 98.31
Posted: December 25th, 2003, 1:14 am
by ameg6
1.8 60 foot time on azenis is freaking awesome
Posted: December 25th, 2003, 8:24 pm
by e r i c s 9 9 s i
ended the 2003 season with 13.501 @ 100.33 mph... (stock JDM R motor)
now for the build and 12's for 2004
Posted: February 4th, 2004, 7:13 pm
by 98 Supercharged R
I have only made a few runs at a crappy 8th mile track and got solid 9's on street tires with zero traction,my tires were slipping through every gear.I figure If I throw some slicks and a upgraded clutch on i'll be in mid 13's to low 13's and then it's time to upgrade to 10psi and see what I can do.My JR kit is running very good but I need to hit the dyno bit time to get it tuned.
Posted: February 9th, 2004, 11:29 pm
by typer rick
My best 1/4 mile time was 14/8 at 97 mph. I think the car would of did better but I had crazy wheel hop so I had to slow down on every launch. I allso dont have any after market parts.
Tools
Posted: April 16th, 2006, 6:05 am
by pipe3405
ITR41 wrote:about the time launch harder.
}:) I dont have what i need to get it done. B) B)