Page 2 of 3

Posted: December 1st, 2007, 6:10 pm
by Erik95LS
Bbasso wrote:Currently in CLT, just chillin...
Lucky. Wish I were down there.

Posted: December 3rd, 2007, 1:19 am
by Bbasso
well I fell a lot better about the car, Will took it for a spin tonight and thought it felt good/fine. Thank you Willard!!
So I'll hit the road after I take shower in the morning, would you guys cross your fingers for me on the way back? I heard there might be some snow in NYC waiting for me :? MXs in the snow+26mm rear= drifto action that's more then I can handle :P for the caR getting me home too :roll:

been Queit in here... what goes on?

How's everyone's weekend so far?

Posted: December 3rd, 2007, 2:20 am
by Erik95LS
Bbasso wrote:well I fell a lot better about the car, Will took it for a spin tonight and thought it felt good/fine. Thank you Willard!!
So I'll hit the road after I take shower in the morning, would you guys cross your fingers for me on the way back? I heard there might be some snow in NYC waiting for me :? MXs in the snow+26mm rear= drifto action that's more then I can handle :P for the caR getting me home too :roll:

been Queit in here... what goes on?

How's everyone's weekend so far?
Mine was good albeit boring. Tried to install seats in the GT3 and it seems these aren't going to fit. THats about as exciting as it gets for me.

Glad the car is doing well and you got to see some old friends. Have a safe drive home

Posted: December 3rd, 2007, 8:41 am
by 98 CW ITR 322
Bbasso wrote:well I fell a lot better about the car, Will took it for a spin tonight and thought it felt good/fine. Thank you Willard!!
So I'll hit the road after I take shower in the morning, would you guys cross your fingers for me on the way back? I heard there might be some snow in NYC waiting for me :? MXs in the snow+26mm rear= drifto action that's more then I can handle :P for the caR getting me home too :roll:

been Queit in here... what goes on?

How's everyone's weekend so far?
Drive slow & carefull. That's not a set 0' PY snow skis. :P

Posted: December 3rd, 2007, 11:06 am
by Dave_B
Erik95LS wrote:
Bbasso wrote:well I fell a lot better about the car, Will took it for a spin tonight and thought it felt good/fine. Thank you Willard!!
So I'll hit the road after I take shower in the morning, would you guys cross your fingers for me on the way back? I heard there might be some snow in NYC waiting for me :? MXs in the snow+26mm rear= drifto action that's more then I can handle :P for the caR getting me home too :roll:

been Queit in here... what goes on?

How's everyone's weekend so far?
Mine was good albeit boring. Tried to install seats in the GT3 and it seems these aren't going to fit. THats about as exciting as it gets for me.

Glad the car is doing well and you got to see some old friends. Have a safe drive home
What's wrong with the seats in it? LOL

Posted: December 3rd, 2007, 2:26 pm
by Erik95LS
Dave_B wrote:
Erik95LS wrote:
Bbasso wrote:well I fell a lot better about the car, Will took it for a spin tonight and thought it felt good/fine. Thank you Willard!!
So I'll hit the road after I take shower in the morning, would you guys cross your fingers for me on the way back? I heard there might be some snow in NYC waiting for me :? MXs in the snow+26mm rear= drifto action that's more then I can handle :P for the caR getting me home too :roll:

been Queit in here... what goes on?

How's everyone's weekend so far?
Mine was good albeit boring. Tried to install seats in the GT3 and it seems these aren't going to fit. THats about as exciting as it gets for me.

Glad the car is doing well and you got to see some old friends. Have a safe drive home
What's wrong with the seats in it? LOL
They're terrible for one, but more importantly they don't work so well with harnesses and rollover protection

Posted: December 4th, 2007, 2:31 pm
by Bbasso
Some pics on the way while I was working on the caR...
but for now,,,

Image

Posted: December 4th, 2007, 3:32 pm
by Bbasso
Image

Posted: December 4th, 2007, 7:38 pm
by get RIGHT
Hahahaha. That 1st shot is exactly the way I would have envisioned it. :P

Posted: December 4th, 2007, 9:57 pm
by 98 CW ITR 322
Bbasso wrote: Image
  • Put on anal exam gloves - Check!
    Attitude adjustment - Check!

Rob I hope that's not your clutch alignment tool you're sporting there. :wink:

Posted: December 4th, 2007, 10:40 pm
by ITR 1102 / MOVE OVER
so you are driving your car now. Awesome.

Posted: December 5th, 2007, 12:24 am
by Bbasso
gloves because I don't care to scrub my hands for hours after :P

Yup, drove the car down to NC for the weekend. not a single problem with the car, weather and tires on the other hand... :roll:

Posted: December 5th, 2007, 12:27 am
by Doespike
Bbasso wrote: Image
Finally........a decent pic :P

Glad she's come back together mang! Time to put some more miles on heR 8)

Posted: December 5th, 2007, 12:40 am
by Bbasso
I thought 1600 miles would be enough for a while ;)

It's back in the garage for a while, no current need for it. But I'll take it out on nice days :)

Posted: December 5th, 2007, 8:50 pm
by Bbasso
Image
for shitsngiggles...

Btw having the 26 vs 23 is a big difference on the street, having the rear swing out so easily is pretty cool :)

Posted: December 5th, 2007, 11:48 pm
by Doespike
LOL, too bad you didn't have a base Integra rear 15mm bar to put in that pic too :lol: That's some heavy beef mang 8)

Posted: December 6th, 2007, 12:09 am
by Bbasso
I could not imagine a 15mm...

The WRX was 17mm(stock) and now that has a STi 20mm.

I deff plan on keeping the 23mm, Ya never know.

Posted: December 6th, 2007, 10:58 am
by Dave_B
I've got a 22, 23 and 26 myself. Nice to have some variety. ;)

Posted: December 6th, 2007, 11:00 am
by Bbasso
I would have kept the 22mm but since it did not have any #'s on it, getting another should not be hard... besides trading it for a 23mm was the easy choice.

Posted: December 6th, 2007, 11:02 am
by Dave_B
Bbasso wrote:I would have kept the 22mm but since it did not have any #'s on it, getting another should not be hard... besides trading it for a 23mm was the easy choice.
I hear that!!!

I had 2 22's... but Mr. I'm a CanukR needed to return 163 to stock...

There went my stock sussy and one of the stock sways.

Posted: December 6th, 2007, 11:09 am
by tartje
i'd love a 26mm Mugen if i could get my hands on one to go with the N1's


too damn expensive though :?

Posted: December 6th, 2007, 11:14 am
by Dave_B
tartje wrote:i'd love a 26mm Mugen if i could get my hands on one to go with the N1's


too damn expensive though :?
It's about the same price as the ASR 32mm hollow which structurally are the same in resistance.

Posted: December 6th, 2007, 11:21 am
by tartje
i want to maintain as much of an OEM look to the car as is possible :lol:

Posted: December 6th, 2007, 12:20 pm
by Dave_B
tartje wrote:i want to maintain as much of an OEM look to the car as is possible :lol:
So the Mugen 26 would be perfect. Still black like the stock one. ;)

Posted: December 6th, 2007, 12:38 pm
by tartje
exactly!


i just don't want to pay that much for an ARB :?


over inflated prices of discontinued Mugen parts FTL :(