Page 2 of 2
Re: pitcures will explain :)
Posted: March 19th, 2008, 11:39 am
by Erik95LS
Dave_B wrote:Bbasso wrote:you also have 12/14 spring Rates?
how many turns on the knobs F/R?
not that bad, Anyone who complains is a Nancy !
Yes sir, on the PY and FBP. Love it!!!
Turns, on the knob?
4 in front, 2 in rear.
I agree, they really aren't bad on the street, even on concrete with the joints.
x3
Re: pitcures will explain :)
Posted: March 19th, 2008, 8:22 pm
by Bbasso
i have four clicks in front and 1 in the rear. but will keep playing with the adjustments over time.
thanks
Re: pitcures will explain :)
Posted: March 25th, 2008, 9:58 pm
by B18CXr
FYI... your 'stupensionz t00na' can't add for chit.
1376# / 1364# = 3# difference.
Recheck the pic fool, you need the get your dyslexia in check.
Re: pitcures will explain :)
Posted: March 26th, 2008, 2:37 pm
by Willard
how does 1367-1364 = 4?
Re: pitcures will explain :)
Posted: March 26th, 2008, 8:43 pm
by B18CXr
numbers fluctate from the display until I write them down....bite me
Re: pitcures will explain :)
Posted: March 27th, 2008, 5:37 am
by Bbasso
Easy now
Good hangin out these past few days
Re: pitcures will explain :)
Posted: March 27th, 2008, 9:15 am
by 98 CW ITR 322
Bbasso wrote:Doespike wrote:An R that doesn't rotate?!
Say it ain't so
Cool pixor ^
Ahhh you know me... I like it extreme.
It does rotate but no where near what I'd like.
What rear sway you runnin' on the back?
And I knows about expansion joints. It's those stiff sidewall Advan OEMs I run.
Re: pitcures will explain :)
Posted: March 27th, 2008, 1:05 pm
by Bbasso
98 CW ITR 322 wrote:What rear sway you runnin' on the back?
Bbasso wrote:All this with the 26mm rsb.