Page 1 of 1

JRSC question

Posted: June 16th, 2009, 2:36 pm
by mnutt346
I've heard that the JRSC from a '00 Civic SI (B16A2) will fit a '00 ITR. True?

Re: JRSC question

Posted: June 16th, 2009, 4:16 pm
by ITRnightrider
yes, the heads are the same unlike the gsr head (b18c1) it is different. but yeah it'll fit.

Re: JRSC question

Posted: June 16th, 2009, 4:17 pm
by ITRnightrider
it will fit all itr models btw not just 00' model.

Re: JRSC question

Posted: June 16th, 2009, 4:48 pm
by mnutt346
Is it still the same exact product as the ITR one?

Re: JRSC question

Posted: June 16th, 2009, 7:18 pm
by ITRnightrider
as far as item number and such im not sure. they should be pritty much the same item though, im sure if you go on jackson's website you'll be able to find out. i know that the manifold that the blower mounts on will bolt up with a b16a2 and b18C5 motor, no b18c1 motor though. the manifold bolt pattern is different. had a friend buy one that was for an itr for his gsr and the pattern was different, he took it to a shop and they drilled holes to match his gsr head.