hi flow cat question
Posted: February 23rd, 2003, 2:43 am
i was looking at random technology's hi flow cat for the itr, but they only list a one for the gsr. are they the same? thanks ahead of time if anyone answers this.
Page 1 of 1
Posted: February 23rd, 2003, 3:46 pm
Carsound makes a few different sizes for hondas, from 2" to 3" i think. Most ITR guys run 2.5" carsounds or slightly modified ones from SMSP.
Posted: February 23rd, 2003, 6:15 pm
is the 2.5 a direct bolt or you need to modify it a bit? also where can i get a carsound cat. i'm in so cal. thanks for the info.
Posted: February 23rd, 2003, 7:11 pm
A 2.5" cat only bolts directly onto a header with a 2.5" collector (JDM-spec header) and a 2.5" catback. The ITR uses 2" piping all around but I have no clue what a GSR uses.
Posted: February 23rd, 2003, 7:44 pm
isn't usdm ITR 2ΒΌ piping front to back? and can you get a car sound Cat that hooks to JDM header AND hooks to a USDM Catback
Posted: February 23rd, 2003, 9:29 pm
Yeah, but you'd have to order one from Carsound with different diameter inlet and outlet.
Actually, you're right almost. The header is 2" and the catback is 2 1/4"... one of you guys correct me if I'm wrong
Actually, you're right almost. The header is 2" and the catback is 2 1/4"... one of you guys correct me if I'm wrong
Posted: February 25th, 2003, 8:56 am
just check with Mike at http://www.ipsracing.com or Dave at smsproduct@earthlink.com
They can both make custom length cats.
They can both make custom length cats.
Posted: March 5th, 2003, 3:52 pm
GSR cat is 5" shorter than the ITR, LS, GS, & RS,
Trust me, Whatever you do DO NOT buy a Comptech cat.
First they'll send you a GSR Cat, then they'll double charge your credit card to send you the RIGHT one, and then about 5000 mi. after you put it on, the screens crystalize and cause restriction. Too Bad your in Cali.
I'd sell you my "GUTTED" Comptech, but it wont pass the sniffer test, or whatever it is you call it...
lat'
Scott Boller
Trust me, Whatever you do DO NOT buy a Comptech cat.
First they'll send you a GSR Cat, then they'll double charge your credit card to send you the RIGHT one, and then about 5000 mi. after you put it on, the screens crystalize and cause restriction. Too Bad your in Cali.
I'd sell you my "GUTTED" Comptech, but it wont pass the sniffer test, or whatever it is you call it...
lat'
Scott Boller
Posted: March 5th, 2003, 4:02 pm
GSR is only different from 1994-1999. 2000 and 2001 is the SAME lengthTypeR00_0371 wrote:GSR cat is 5" shorter than the ITR, LS, GS, & RS,
Trust me, Whatever you do DO NOT buy a Comptech cat.
First they'll send you a GSR Cat, then they'll double charge your credit card to send you the RIGHT one, and then about 5000 mi. after you put it on, the screens crystalize and cause restriction. Too Bad your in Cali.
I'd sell you my "GUTTED" Comptech, but it wont pass the sniffer test, or whatever it is you call it...
lat'
Scott Boller
Posted: March 5th, 2003, 4:31 pm
really? hmmm... *Standing Corrected*
Posted: March 5th, 2003, 4:35 pm
Yep,
Not sure if they changed to standardize parts por what but 2000 and 2001 went to the same length as all the others.
Not sure if they changed to standardize parts por what but 2000 and 2001 went to the same length as all the others.
Posted: March 5th, 2003, 4:37 pm
now that I think about it, I've never done exhaust on 00-01 GSR
they've all been pre-99
they've all been pre-99