radiator issue - any ideas?
Posted: June 21st, 2010, 11:35 am
Hi guys/gals
I bought a 97 #424 itr a few weeks ago and I need to fix the rad. Previous owner put in AC, the AC core has vibrated against an aftermarket rad enough to cause a very very small pinhole in there. When I turn the car off, I can hear the rad and see the rad spray a little steam/coolant (from the front passenger side where it's rubbing the ac core). These are literally "PIN holes". The amount of liquid coming out is very small but none the less, exists
So, I have a couple options here to fixing it and figured I would turn to the pro's for your opinion. Here they are:
1. Install my OEM s2000 rad (if it fits)
2. Put my OEM s2000 rad back in the s2000 and my spoon rad in the ITR (again, if it fits)
3. Somehow try welding the pinholes
4. Find a low mileage oem integra rad (but they are prone to cracking)
5. buy a koyo/mishimoto etc.
thanks everyone
Chris
I bought a 97 #424 itr a few weeks ago and I need to fix the rad. Previous owner put in AC, the AC core has vibrated against an aftermarket rad enough to cause a very very small pinhole in there. When I turn the car off, I can hear the rad and see the rad spray a little steam/coolant (from the front passenger side where it's rubbing the ac core). These are literally "PIN holes". The amount of liquid coming out is very small but none the less, exists
So, I have a couple options here to fixing it and figured I would turn to the pro's for your opinion. Here they are:
1. Install my OEM s2000 rad (if it fits)
2. Put my OEM s2000 rad back in the s2000 and my spoon rad in the ITR (again, if it fits)
3. Somehow try welding the pinholes
4. Find a low mileage oem integra rad (but they are prone to cracking)
5. buy a koyo/mishimoto etc.
thanks everyone
Chris