ITRCA

Anyone know the center bore size of a 15x7 TE37?

for a 15 x 7 + 35, 4 x 100 - it takes a 65mm hubcentric ring. Not sure if it's different 5 x 114.3.

I got this info from Mackin. Email directly.

bduong@mackinindustries.com

*edit, i meant 65*

Thanks crxgator, I ended up taking the rim off and measured with a caliper. It's a 15x7 43mm offset TE37 5x114.3 The center bore was 73mm.