Page 1 of 1

FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, more

Posted: October 13th, 2010, 4:42 pm
by cheezthis
Silver Volk TE-37 16x7, 4x114 (JDM 96-spec size)

Asking $1200 obo...not really sure the market on these wheels as they seem to be pretty rare in this configuration.

I need to downsize on the amount of wheels here. I wanted to use these but have not got around to it.

Condition is used: some scratches, one wheel has a decent curb mark on the exterior, balance and mount great though

Image

Image

Image

....

Mugen Intake

Condition is good, missing the wheelwell bracket and the bracket by the air filter. I bought it like this and did not know they were missing. They are not relevant though.

Asking $550 obo

Image

...

ITR Motor Mounts

They're roughly 2 years old, original rubber, all 5 mounts. I'm not sure of the mileage, but visibly look good. I replaced them with some Mugen Mounts to tighten up a few things. These could be great for a rebuild or a swap into an EG. I'm unsure on price, so...

Asking $150 obo...definitely more flexible with pricing on these.

Image
...

Stock JDM 96 spec ITR wheels

I got them painted blue/green. I stripped the outside of them and painted them this faux powder coat graphite color. It will strip right off and can be painted whatever. They were completely balanced and straight when I had them on the balance machine in early July.

Asking $450 obo

Image

Image

...

I am more flexible on pricing with some items vs others. I'm sure there are plenty of people who will vouch more if you have any concerns. Thanks for looking!

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 6:51 pm
by itr #1334
Might be pm'ing you for the mooogen

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 7:19 pm
by cheezthis
PM away :)

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 7:21 pm
by Dave_B
If Lucas doesn't want it, I know 2 people have PM'd me about the intake, and I've pushed them Ryans way. Now that he's not selling... you shouldn't have it long.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 8:33 pm
by coolhandluke
Those are cheap prices Jay. Please buy with confidence.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 9:45 pm
by Little_Nolan
The TE's are a pretty rare offset/lug pattern combo.

Almost 2yrs on the dot for the mounts :D

Man those itr wheels would look NICE on the ay-cord :lol:

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 9:53 pm
by cheezthis
Ha, thanks Nathaniel! That would be funny if they ended up over there again.

I agree, the Volks are pretty rare. I wouldn't be too sad if no one bought them. I wanted to use them as track wheels but never got around to finding tires for them. Now, my garage closet is over-filled with wheels/tires/etc.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 10:14 pm
by Little_Nolan
Yeah I would love to have them back for the accord, they were un-nicked un-bent un-whored out R wheels when Nolan had them and thats why I wanted em so bad.. new buyer will be happy with those wheels for sure.

As for the Volks, I say you keep them.. they are in great shape for being all original and would be KILLER track wheels. + it would be hard to find another set like that again.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 10:16 pm
by cheezthis
If the Mugen intake and motor mounts sell quickly, I will probably keep the Volks. The second set of ITR wheels can go either way. I do need to downsize on wheels here. I have an extra set of wheels for the TSX and RSX here too, so it's super crowded in there :P

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 11:14 pm
by Little_Nolan
Ohh geez, I didnt figure you for a wheel whore :lol:


Buy with confidence everyone, Jay is good peepz and he has quality parts.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 13th, 2010, 11:31 pm
by cheezthis
Yep, summer wheels and winter wheels...that stuff adds up when you have two daily drivers here (two people).

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 14th, 2010, 2:12 am
by fullybuilt2.0
bump for ITR goodies!! GL with the sale bro!!

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 21st, 2010, 12:36 am
by cheezthis
Thanks everyone!

I have a lot of interest in everything, but no one has actually purchased something. With that said, everything is still available. :) Please, help me clean out my garage for my own sanity...and other people's sanity too :P

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 21st, 2010, 8:10 am
by coolhandluke
FYI Jay has been heavily involved in the ITR community for a long time. Please buy with confidence.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 21st, 2010, 2:16 pm
by cheezthis
Thanks to Mugen Mike undercutting the Mugen Intake price :P ...

Mugen Intake...now $500.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: October 26th, 2010, 10:40 pm
by cheezthis
Bump? :P

...

Actually, I wanted to add my recently purchased front and rear mugen strut bars too. Tuition is due, so every dollar helps!

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: November 12th, 2010, 3:09 pm
by cheezthis
Motor mounts have a couple interested buyers, but everything else is still available. I'm kind of surprised the intake is still available.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: November 12th, 2010, 9:07 pm
by Mugen Mike
cheezthis wrote:Thanks to Mugen Mike undercutting the Mugen Intake price :P ...

Mugen Intake...now $500.
D'oh! Sorry about that! :P

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: November 12th, 2010, 11:58 pm
by cheezthis
Mugen Mike wrote:
cheezthis wrote:Thanks to Mugen Mike undercutting the Mugen Intake price :P ...

Mugen Intake...now $500.
D'oh! Sorry about that! :P
No sorry needed :) Did your's sell? I hadn't checked.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: November 13th, 2010, 11:14 am
by B18CXr
FYI Jay has been heavily involved in the ITR community for a long time. Please buy with confidence

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: November 14th, 2010, 11:39 am
by cheezthis
Motor mounts are sold!

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: December 1st, 2010, 4:26 pm
by Dave_B
I sent an HT guy you and Mikes way. He's looking for a Mugen intake if either of you still have one FS.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: December 1st, 2010, 4:33 pm
by cheezthis
Still have it, yep.

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: December 18th, 2010, 10:12 am
by cheezthis
$250 for the ITR wheels ... :)

Re: FS:4x114 Volk TE-37 silver, Mugen intake, ITR mounts, mo

Posted: January 10th, 2011, 2:19 am
by cheezthis
If the Volks do not sell soon, I will use them as track wheels this year. Just FYI for anyone debating on them.

The ITR wheels will still be available though.