ITRCA

I went to New England Dragway Friday. First time this year and first time with my new mods.

DC JDM Header
Carsound cat
AEM CAI

I ran a 15.08 @ 92.7 MPH
and a 15.17 @ 93.2 MPH

Both with REALLY BAD wheel hop!!!
I was hoping to run a 14.7-14.8 I'm sure I will hit it next week. I had 3/4 of a tank of gas. I don't think that makes a huge difference. I didn't drop the pressure in my tires. Brigestone Potenzas 195/55/R15 Pole Position's
I got the Mods done a few days ago and I am still adjusting to the differences. I used to run Between 15.2-15-5

What 60 foot? If you want any kind of traction out of the hole on street tires, don't burnout, and make sure your tire pressure is between 15 and 20, start at 20, and work your way down until you find the sweet spot.

R/T .573
60' 2.571
330 6.563
1/8 9.845
MPH 75.96
1000 12.678
1/4 15.081
MPH 92.00

I did a burnout before. I need to practice my launch so I minimize wheel hop.

I repeat, do not do a burnout with those tires, it will not do you any good, and lower the pressure.

I'm pury sure that you can do, what you want to do 14.7-14.8. because my best time is 14.6 and the only mod that I have is= JDM Header and CAI.

sick tr wrote:I'm pury sure that you can do, what you want to do 14.7-14.8. because my best time is 14.6 and the only mod that I have is= JDM Header and CAI.

What? I cannot decipher this jibberish.

Jan Niemi wrote:

sick tr wrote:I'm pury sure that you can do, what you want to do 14.7-14.8. because my best time is 14.6 and the only mod that I have is= JDM Header and CAI.

What? I cannot decipher this jibberish.

Serious Sh-t dude.

I think your thought processes are probably in place, and in your mind you know what you want to say, but writing it down is just giving you some problems.

So what is it that you want to say?