ITRCA

Posted: **December 13th, 2003, 1:42 pm**

ok i've had this for awhile, and planning on getting rid of it with in the next 2 weeks. but after the car warms up and i'm driving, i hear a terrible rattle coming from the exh. piping. a couple people that've ridden in my car ask me if i have an exh. leak but i don't.
i've removed a couple of the heat shields in between the piping and the chassis but it's not that. (because it's like a thin metal rattle)
NOW the only conclusion i could come up with is it being the the spings for the seal connections for the exh. piping. can anyone confirm this or even know what i'm talking about?

with in the next couple weeks i'm gonna put my JUN header on and from there i have a guy redoing all of my exh. in 2.5 mandrel bent SS piping all the way back to the cannister.

i know the rattle will be long gone in a week or two and won't have to worry about the annoying rattle, just wanna find out so i know that's all. thanks ahead of time guys

Posted: **December 13th, 2003, 4:08 pm**

maybe the cat needs replacing

Posted: **December 13th, 2003, 4:41 pm**

sorry, i failed to state that it doesn't have a cat. just a straight pipe welded not even and O2 plug

Posted: **December 13th, 2003, 7:59 pm**

What header?

Posted: **December 14th, 2003, 12:00 pm**

do you have an aftermarket exhaust? if so are all the necessary gaskets installed?

Posted: **December 14th, 2003, 9:38 pm**

nvm. . .

Posted: **December 14th, 2003, 9:42 pm**

Posted: **December 15th, 2003, 12:40 am**

JUN header, JUN mm canister

Posted: **December 15th, 2003, 10:59 am**

Do you have a aftermarket short shifter?

Posted: **December 15th, 2003, 8:37 pm**

nope stock shifter. it's gotta be the clamp springs, i thought it was an exh leak but it's not. and it's definately the piping. i was just wondering if anyone has had the same issues of the rattle

Posted: **December 16th, 2003, 11:20 am**

Only rattle I had was my shifter hitting my heat sheild...thats why I asked...

Posted: **December 21st, 2003, 4:18 am**

i had rattling but it was because of the brushings n wire hanger of my exhaust cat conv.

Posted: **December 22nd, 2003, 9:22 pm**

i hate rattleing

i'm thinking of instead of getting the 2.5 mandrel bent SS from front to back i'm going to get the JG race B pipe and leave it

Posted: **January 3rd, 2004, 1:12 am**

Are you sure that it's coming from your tail end? Thre reason I ask is that I have 90,000 miles on my '00 ITR and my wheel bearings gave in. As I accelerate the rattle became faster and faster, and there was vibration also.

Posted: **January 4th, 2004, 5:04 pm**

It could be the axle back hitting the control arm...

ITRCA

rattle? ? ?<---

rattle? ? ?<---