Page 1 of 1

Hondata?

Posted: March 8th, 2004, 2:01 pm
by jiahanhao
Is there any reason this:http://cgi.ebay.com/ebaymotors/ws/eBayI ... 2464457425 couldn't be used for Hondata? I've been looking for a bloody p72 forever...

Posted: March 8th, 2004, 5:23 pm
by ITR41
why waste money on a P72 when you can get a P28 :?

ecu

Posted: March 8th, 2004, 6:23 pm
by Jan Niemi
Just buy the ECU from Hondata, it will be ready to plug and play just like this
http://itrca.com/forums/viewtopic.php?t ... bc6d41d3be

Posted: March 8th, 2004, 6:40 pm
by jiahanhao
I thought the p28 didn't have the IAB or knock sensor functions? I'd prefer to have these...
(I want my 8 hp in the 3000 rpm range dagnabbit). Besides, I already have a conversion harness (from an old project)

Posted: March 8th, 2004, 8:23 pm
by 400whpitr
hey wow cool link to ebay. Even though i don't have an integRRRa type r i believe that will work for your car. Though when you put it in you have to be careful. You are supposed to turn it sideways when you put the chip in even though it seems like you put it the right way. I have a turbo on my integra car and that chip on ebay and it goes very fast too. If you cant get the chip in you have to bang it a couple of times b4 you can get it in. But once it goes it you will be speechless and in awe :o . Good luck fellow itr user. If you cant get the chip in u can use peanut butter to try to wedge it in. Have fun.

Posted: March 8th, 2004, 8:25 pm
by 400whpitr
-snip-

Posted: March 11th, 2004, 5:53 pm
by jiahanhao
jiahanhao wrote:I thought the p28 didn't have the IAB or knock sensor functions? I'd prefer to have these...
(I want my 8 hp in the 3000 rpm range dagnabbit). Besides, I already have a conversion harness (from an old project)
nobody told me that there's no IAB on an R =P. I went ahead and got the p28 with an s100