hondata
Posted: March 12th, 2004, 12:11 am
For you guys who are runnung a hondata system.
Does you car have a check engine light on when installling the system.
Does you car have a check engine light on when installling the system.
Page 1 of 1
Posted: March 12th, 2004, 9:12 am
Not on mine...I'm running a OBD1 ecu tho and a missing link as well.
Hondata
Posted: March 12th, 2004, 1:21 pm
Erik,
Why are you running a missing link with Hondata? Or are you joking?
Why are you running a missing link with Hondata? Or are you joking?
Posted: March 12th, 2004, 6:01 pm
if you don't have a 3 bar map you can run a missing link
map
Posted: March 12th, 2004, 8:43 pm
How is his ecu sensing boost, if not via a map sensor?
I run the stock map sensor, and the Hondata uses it to sense boost. It is good up to 11 to 11.5 psig.
I run the stock map sensor, and the Hondata uses it to sense boost. It is good up to 11 to 11.5 psig.
Posted: March 12th, 2004, 11:30 pm
Yeah mine is ran like Jan's but I have a obd2-obd1 harness and I'm using a p28 ecu. No missing link and no check engine light.
Posted: March 21st, 2004, 8:05 pm
OBD2-OBD1 adapter harness and P28 ECU with Hondata (old stage4). No check engine light, except at redline when it's time to shift.
Posted: October 30th, 2005, 1:33 pm
i'm running hondata and i have no mil. Hondata is one of the best investments I made for my itr