Integra Type R Dynojet Results

Discuss national (except for the ITR Expo), regional and local events and meets here.
Locked
98 Spec R
New ITRCA Member
Posts: 15
Joined: April 11th, 2004, 5:27 pm

Integra Type R Dynojet Results

Post by 98 Spec R »

I was wondering if anyone has dynoed their ITR. I have recently done a bunch of dyno runs at the LOCASH RACING DYNOJET in Phoenix AZ testing different ECU's on my stock ITR and I get between 155 - 166 hp to the wheels. The Genuine OBD II Mugen ITR ECU and the LOCASHRACING OBD1 USDM ITR program dynoed the most power. I got about 11 Horsepower over my stock USDM ITR ECU using the Locashracing ECU program. I gained hp and torque over the stock ITR program at every RPM level using the Locashracing and Mugen ECU. I made 3 hp over the USDM ECU using the JDM ITR ECU 96 Spec R. I pulled about 20 different runs using 4 different ECU's I will see if I can post the results on the web for you all to see.

Long story, Locashracing will do a Type R dyno day and if we got enough Type R's together in the Phoenix Area like 5 or so we could get a very good rate at the Dyno! So if anyone is interested reply.
1998 Type R #1199
looose
New ITRCA Member
Posts: 23
Joined: January 21st, 2004, 6:27 pm
Location: az

Post by looose »

wow, 11hp is huge for jsut an ecu.
i would come out, jsut to see how my poor erngine is doing
dyno days are always so diapointing for me :(
besides bro, i think you and i are the only ones in here.
98-1065
knowledge
ITRCA Member
Posts: 395
Joined: September 8th, 2003, 3:21 am
Location: NORCAL

Post by knowledge »

Arizona is far far far from me.
96gsrtyper
New ITRCA Member
Posts: 3
Joined: April 13th, 2004, 4:44 am
Location: San Diego, CA

Post by 96gsrtyper »

96 JDM ITR motor, 98+ JDM ITR tranny, act stage 3 clutch, aem cai, nology hot wires, denso irirdium spark plugs, dc sports 4-2-1 ceramic gsr headers, magnaflow prototype 2.25" high flow cat, magnaflow 2.25" gsr cat back exhaust. Put 190 hp at the wheels and 136 ft/lbs of torque. This was on the dynojet at magnaflow's tech center (which hot rodding magazine labled the most accurate dyno in the us).
jon
AcuraITR00
New ITRCA Member
Posts: 15
Joined: April 13th, 2004, 4:46 pm
Location: Phoenix, Arizona

phx

Post by AcuraITR00 »

im oin the phx area and sure wouldnt mind dynoing my ITR
.......go fast.......faster.......fastest.
95 Integra Se- RIP
96 Integra LS- Sold
95 Integra LS/Vtec- sold
98 ITR- Rip
00 ITR- Rip
94 Integra LS- still with me
knowledge
ITRCA Member
Posts: 395
Joined: September 8th, 2003, 3:21 am
Location: NORCAL

Re: Integra Type R Dynojet Results

Post by knowledge »

I pulled about 20 different runs using 4 different ECU's I will see if I can post the results on the web for you all to see.

I am curious to see these! :wink:
b19coupe
New ITRCA Member
Posts: 7
Joined: July 16th, 2003, 11:16 pm
Location: California

Post by b19coupe »

Image

It's stock :wink:
Locked