Page 1 of 1

Sport Springs on an ITR

Posted: November 28th, 2002, 9:30 pm
by dub27
Hi,

I just got some 18" Volk Racing Daytona Speeds and am looking to lower my 1997 ITR with springs. I was look at the Neuspeed Sport springs which lower the car 1.75" front and 1.5" rear. I was wondering if anyone has tried this or H&R springs or Eibach springs on an ITR. Will the ride be too low?

Thanks,
branvan27@yahoo.com

Scraping

Posted: November 29th, 2002, 3:52 am
by Aj
with a drop like that and 18" wheels, you'll rub like hell, you really don't want to go anything lower then like and inch or so all around, and even then, that's cutting it close, you'll have to be riding around on some rubber bands.

I had the H&R sport springs on my car until I just recently got coilovers, and liked them quite a bit, they looked sweet, rode well, and weren't too low. The drop on them waa like 1.3 in the front and like 1.5 in the rear, I'm pretty sure. I had 18's on my car for like an hour, and after scraping all the tar inside my wheel wells off, I took them off, and gave them to a friend, thankfully who gave me basically what I paid for them.

With any drop greater then like 3/4 of an inch, you'll need to run on like 205/35/18 or 215/30/18, this way you don't scrape, the tires on mine that were scraping were 215/35/18, or maybe they were 225, but it wasn't that bad, I was just afraid I'd get a blow out or something If I rubbed too much.

Good luck,
Aj

Posted: November 29th, 2002, 4:26 am
by TypeR882
Get the Eibach springs. It is only like a .75 inch drop

Posted: November 29th, 2002, 5:03 am
by SagaTypeR
I have Neuspeed Sport Springs on my car and rolling on JDM 16" ITR wheels. Hell....people think I'm low compared to some cars :?

Posted: December 3rd, 2002, 3:53 am
by Rotaree
Have the H&Rs with Koni Sports (Yellows) on hers. Rides pretty nice. Just a bit over an inch drop.

Kyle