As of right now my mods are: TODA Header, Omni Power Test-Pipe, DC Sports Cat-Back Exhaust, Denso Iridium Plugs, NGK Wires, and an AEM CAI.
Future Plans as follows: TODA Spec C Cams, TODA Valve Springs & Retainers, TODA Cam Gears, Mugen Metal Head Gasket, High Compression Pistons (Not Sure What Brand yet), TODA Sport Injection Kit (ITB's yay! ) and a HONADATA S300 to manage all of that.
I Dont what to buy a clutch twice. So I need it to be able to handel all my future plans. I do daily drive my car, but I also go to the circut and run. VIR, CMP, & Road Atlanta.
I was thinking about getting the ACT HD Clutch Kit with a 6 puk sprung hub setup. And then to go along with that there prolight flywheel.
What do you guys think? What is your suggestion for clutch kits and flywheels?
What Clutch and Flywheel Setup should I go with?
-
- New ITRCA Member
- Posts: 23
- Joined: March 21st, 2005, 1:42 pm
- Location: North Carolina
What Clutch and Flywheel Setup should I go with?
2000 Integra Type R (yellow)
-
- Post Whore!!
- Posts: 6571
- Joined: September 25th, 2002, 1:21 am
- Location: South Carolina !
- Contact:
I had the ACT XT-SS in my car for 20k + miles and it kinda hard to get the healtoe just right with that clutch, It did not have enough travel. It was like a toggle switch and On track I feel the stock is a whole bunch easier to shift with. I might try the ACT hd-ss next time I need a clutch... Which I think might be rather soon.
swed
-
- New ITRCA Member
- Posts: 17
- Joined: November 6th, 2002, 8:34 pm
- Location: AL
Action Kevlar. I run one in my ITR. Smooth as silk and can handle plenty of power.
http://www.m24x.com/clutch101.htm
That's a clutch article featuring the following:
* ACT
* ClutchNet
* Clutchmasters
* RPS
* HC Racing (Herson Racing)
* Action Clutch
* Clutch Specialties
http://www.m24x.com/clutch101.htm
That's a clutch article featuring the following:
* ACT
* ClutchNet
* Clutchmasters
* RPS
* HC Racing (Herson Racing)
* Action Clutch
* Clutch Specialties
2001 ITR
13.737@100.4mph
Auto-X ownz my tires.
13.737@100.4mph
Auto-X ownz my tires.
^ +1 i just put in an Action 1KS on my teg when i put the tiper tranny in. so far i absolutly love it. pedal is just a tad harder than stock and the engagment its buttery smooth. i would say the 1KS should be able to hold the power u would make, but if u wana stiffer pedal and make sure u get it right first u might wana go with the 2KS, which should easily be able to hold your power and take the abuse and the actual clutch should be able to out live your car.
heres where i bought mine from.
http://www.garage-life.com/Action_Clutch.html
and the h-t thread where i learned about em.
http://www.honda-tech.com/zerothread?id=1152082&page=1[/url]
heres where i bought mine from.
http://www.garage-life.com/Action_Clutch.html
and the h-t thread where i learned about em.
http://www.honda-tech.com/zerothread?id=1152082&page=1[/url]
94 Integra GSR
-
- New ITRCA Member
- Posts: 23
- Joined: March 21st, 2005, 1:42 pm
- Location: North Carolina