Page 1 of 1
My car is spazzing out on me! Please Help!!!
Posted: March 8th, 2006, 10:27 am
by talktonight
My car is spazzing out on me! My speedo bounces around and all my lights flicker going from brighter to dimmer. My car is throw a code 20. I looked it up. Something about an Electrical Load Distributer. What the hell is that?
So I tryed resetting my ECU by disconnecting my negitive terminal on my battery. That didn't work. This all happened after I took her to the drag strip for the first time. I've never done a dead stop launch on my car before. Friends of mine said to rev it up to about 3000 rpms, this sounded to high to me so I did it at 2500 rpms. My car got some nasty wheel hop. From what everone said at the track that that is normal on FF cars. I am thinking something got shook loose when this happened, but what I dont know. please help me! I am in college and broke so I dont have the bank to take her into the acura shop for repair.
Posted: March 8th, 2006, 11:59 am
by Bbasso
20-Electrical Load Detector defective circuit or unplugged / defective sensor.
I would suggest going out to the car and start your search for a loose plug. if you can't find one then I suggest heading over to P1Auto.com since you are in NC. Maybe Jack could help you out.
This is the first time I have heard of this happening, sorry I can't be of more help. Maybe one of the members here might be able to point you in the right direction..
Posted: March 8th, 2006, 5:52 pm
by talktonight
Im sure Jack at P1 could find and fix the problem. Im just a little tight on money right now so hopefully someone on here has come across this issue, so I can try to fix it myself. I checked most plugs and sensors ( the ones that I can see without having to put my car on a lift or taking parts out. The ones I looked at seemed fine. So again if anyone has any sugestion it is well appreciated.
Posted: March 10th, 2006, 10:04 pm
by talktonight
Yay I fixed my problem! All it turned out to be was two blown fuses. My alternator fuse and my speedo fuse. So gladly a cheep and easy fix.
Posted: March 11th, 2006, 2:54 am
by Bbasso
Glad it was cheap and easy.
Posted: March 11th, 2006, 9:42 am
by get RIGHT
Good to hear.
It always sucks when its the $.50 piece that goes wrong.
Yet, its always a relief when its the $.50 piece that went wrong.