Integra Type-R Discussion - Discuss general ITR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 4:40 pm
So there appears to be a mysterious problem with my hydraulic clutch system. After bleeding the system, the clutch will be fine for a few hours, then the pedal will slowly start getting closer to the floor, eventually far enough that I cannot disengage the clutch full.
Any suggestions?
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 4:42 pm
Just reading that I remembered I had the same problem with my accord!!! Holy shit
Bbasso
Post Whore!!
Posts: 6571 Joined: September 25th, 2002, 1:21 am
Location: South Carolina !
Contact:
Post
by Bbasso » May 24th, 2006, 4:42 pm
Yeah you got an AIR leak.
take apart each connection, clean them, inspect, prep, and re-install.
swed
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 4:43 pm
Seriously though, I really did have the same prob.
On a 90 accord the there is a line on top of the trans. It was loose and fluid was slowly leaking out of it. Tightened it up and its fixed...
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 4:43 pm
It would seem so, Rob.
We have so far replaced the clutch MC, slave cylinder and the line going from the MC to the slave.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 4:44 pm
Bbasso wrote: Yeah you got an AIR leak.
take apart each connection, clean them, inspect, prep, and re-install.
I'm willing to put money on it that its coming from the line on the bottom of the resorvoir!!
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 4:44 pm
walker111 wrote: Seriously though, I really did have the same prob.
On a 90 accord the there is a line on top of the trans. It was loose and fluid was slowly leaking out of it. Tightened it up and its fixed...
On a manual transmission?
connections on both end of the line are tight.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 4:46 pm
walker111 wrote: I'm willing to put money on it that its coming from the line on the bottom of the resorvoir!!
Well we'll find out if that is in fact the issue in a day or two, I have a new hose on order as well as a new reservoir cap.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 4:46 pm
Yes manual trans. The accord is different from our cars. One day I went to work, the closer to work I got the shittier the feel of the clutch. Finally getting to work I poulled into a parking spot I couldnt get the damn thing out of gear..
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 4:47 pm
Mugen Mike wrote: walker111 wrote: I'm willing to put money on it that its coming from the line on the bottom of the resorvoir!!
Well we'll find out if that is in fact the issue in a day or two, I have a new hose on order as well as a new reservoir cap.
You need it now!!! I want to know if this fixes the problem!
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 4:48 pm
You could prob quick fix it and buy a piece of tube from auto zone and see if it works.
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 4:49 pm
Be team "I'm gonna fix the problem" and try that tonight.lol
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 4:52 pm
walker111 wrote: You need it now!!! I want to know if this fixes the problem!
w00t! Just got word that the parts are in. We'll be giving it another shot at fixing it tonight.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 4:52 pm
walker111 wrote: You could prob quick fix it and buy a piece of tube from auto zone and see if it works.
No need, the parts are in.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 5:20 pm
Awesome! Try the hose first, unless there is anther leak somewhere else I am almost positive that will solve the problem. I expect to hear a full report when it is completed.
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 5:26 pm
Atleast you should be driving the car this weekend
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 5:41 pm
walker111 wrote: Awesome! Try the hose first, unless there is anther leak somewhere else I am almost positive that will solve the problem. I expect to hear a full report when it is completed.
Only parts I'm replacing tonight are the hose and reservoir cap.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 5:43 pm
walker111 wrote: Atleast you should be driving the car this weekend
Let's hope so! I don't think I've put more than 250 miles on it this year.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 5:49 pm
I have faith in the logic. Should be an easy night then! Drive it to work tomorrow, I've put atleast 5k in 06
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 6:08 pm
I will post an update tonight when I get home. Hopefully the update will be late tonight, after I drive the bitch around for a few hours.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 6:14 pm
haha man, good luck, hope it works out for you!
Enjoy the R...
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 6:15 pm
walker111 wrote: haha man, good luck, hope it works out for you!
Enjoy the R...
My fingers are crossed. I
really don't want to have to drop the gearbox right now....
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 6:17 pm
You wont have too!
Mugen Mike
Senior ITRCA Member
Posts: 1301 Joined: November 6th, 2002, 9:18 pm
Location: Milwaukee, WI
Post
by Mugen Mike » May 24th, 2006, 9:00 pm
So yeah, umm - maybe I'll have more news tomorrow night.
-Mike
'98 ITR #142
I wish I had a cak. -Dawn
walker111
Post Whore!!
Posts: 6721 Joined: June 9th, 2005, 4:27 pm
Location: I love Dawn!!!
Post
by walker111 » May 24th, 2006, 9:37 pm
WTF!!! Details man!