ITRCA

What would be a good camber kit to put on a TYPE R ? Should I go with aftermarket or OEM ? IF aftermarket ... which ones are good @ a reasonable price. And which one is the best ?

I have the Omni front kit that I won at Expo6, seems like a good quality. But I have yet to install it, I'm waiting on some other parts first.
Also is the Skunk version.

May I ask what you need it for?

deff not the ingals kit!

I went with Skunk2 for the front and I have no problems.

Well my struts went out ... on my whole passenger side ... so I replaced all 4 with some koni sports shock absober ... Got my car align ... then about a week or two later ... my kar starts pulling to the side ... so i took it in to get align again ... the guys said i needed new cambers cuz the orginal on there is bad on the passenger front side ... so whats happen iz its eating my tires all uneven on the driver front side ... and those are sum expensive tires FALKEN AZENIS ... heard I could only get a max of 10k miles off those tires ... which i didnt find out till i got there ... but i had it special order so i couldnt say i didnt want it anymore ... but ever since i replace my shocks ... my whole suspension dont feel the same like it use to be I used my stock springs because around where i live theres alot of construction going on and floods ... so i didnt want it lower than 1.5" off the ground ... any suggestions ? Like I really want my suspension to be like it use to be or better ...

Okay whats the different between skunk2 pro and just a reg. skunk2 ?

absolutely nothing from what I can see.

Skunk2 fronts, washers in the rear!

i got the ingalls and it didnt straightin the wheels ebough so i had to go skunk2 also