Page 1 of 1

Buying a USED JRSC

Posted: May 29th, 2007, 2:17 am
by JDM98Spec
Hello All,
I am interested in purchasing a used Jackson Racing supercharger for an Integra GS/GSR (b18a) motor. The package comes with all the pulleys belts and fuel pressure regulator. Currently I’m running a 98spec JDM type r motor (b18cr) with a P73 ecu.

1) Would the supercharger be compatible for my motor?

2) What type of engine management system should I use?

3) Not sure how many kilometers are on the blower, what things should I look out for when purchasing a used supercharger?

I know you guys know ur stuff, so your advice would be greatly appreciated, thanks

Re: Buying a USED JRSC

Posted: May 31st, 2007, 1:08 am
by Mary
The only thing I know is that JR make the same supercharger for the SiR and the Type R, and that the GSR isnt the same because of the intake manifold is different.

Posted: June 18th, 2007, 7:50 pm
by ITR 1102 / MOVE OVER
I don't think it is compatible like stated earlier.

I am using Hondata S300 and love it

make sure it is not leaking at the seals and look at the screws in the blower. If they look very worn, I wouldn't recommend buying it.