2000 USDM ITR PARTS OEM/ Aftermarket ( block , pistons )
Posted: May 12th, 2008, 11:29 am
Hey all
i have a few things layin around i want to get rid of
first i have a set of Brand new pistons and rods , ( i pulled them from an ITR black i bought from LEN at Suns Acura in Ga.) 400$$
i have a set of used pistons and rods from MY stock motor , 40k on them --- 100$
3) B18C5 Block >> **LEGIT** USDM ITR block , out of Kieth ( rizen) 's car , we traded motors , and then i got a diffrent one , it is a SLEEVED block .
Darton sleeves in cylenders 1 and 4 , 2 and 3 need to be replaced , and i already pressed the 2 bad sleeves out
thos block has made over 500 whp on a turbo setup , and made 229 on my all motor setup before my nitrous got to the 2 sleeves
Darton Sleeved 84MM B18C5 Block ( bare Block ) 900 OBO
4> i have 2 used B-series ACT stage 2 clutch disks ,one with 90% meat left , the other with 65-70 % left
Clutch 1 ( 90%) $ 50
Clutch 2 ( 65-70%) $ 25
5. usdm ITR Air conditioner condensor pulled off of my car at 100 k miles , BUT , was NOT connected since 35k - $100
6 ,> Trunk carpeting ( NOT the ITR Checkered mat ) just teh carpeting that goes up that back of the seats , and coveres that plastic thing that coveres the spare tire
i have 2 of these carpets $ 50 each
Thee is some more stuff i am forgetting i know , so i will update every so often
the prices are NEGOTIABLE , and i am willing to LISTEN to trades , if they are worth it , i will accept trades for parts .
currently ikm looking for a nice set of 15 inch wheels ,
or maybe some 16 if you guys have
You can send me a PM here ,
But to comtact me your best bet is to Message me on AIM , my Screen name is : JGTOAD
i am also on Honda-Tech . same name as here ,
i have vouches , and if you want pics ill be glad to take some
i have a few things layin around i want to get rid of
first i have a set of Brand new pistons and rods , ( i pulled them from an ITR black i bought from LEN at Suns Acura in Ga.) 400$$
i have a set of used pistons and rods from MY stock motor , 40k on them --- 100$
3) B18C5 Block >> **LEGIT** USDM ITR block , out of Kieth ( rizen) 's car , we traded motors , and then i got a diffrent one , it is a SLEEVED block .
Darton sleeves in cylenders 1 and 4 , 2 and 3 need to be replaced , and i already pressed the 2 bad sleeves out
thos block has made over 500 whp on a turbo setup , and made 229 on my all motor setup before my nitrous got to the 2 sleeves
Darton Sleeved 84MM B18C5 Block ( bare Block ) 900 OBO
4> i have 2 used B-series ACT stage 2 clutch disks ,one with 90% meat left , the other with 65-70 % left
Clutch 1 ( 90%) $ 50
Clutch 2 ( 65-70%) $ 25
5. usdm ITR Air conditioner condensor pulled off of my car at 100 k miles , BUT , was NOT connected since 35k - $100
6 ,> Trunk carpeting ( NOT the ITR Checkered mat ) just teh carpeting that goes up that back of the seats , and coveres that plastic thing that coveres the spare tire
i have 2 of these carpets $ 50 each
Thee is some more stuff i am forgetting i know , so i will update every so often
the prices are NEGOTIABLE , and i am willing to LISTEN to trades , if they are worth it , i will accept trades for parts .
currently ikm looking for a nice set of 15 inch wheels ,
or maybe some 16 if you guys have
You can send me a PM here ,
But to comtact me your best bet is to Message me on AIM , my Screen name is : JGTOAD
i am also on Honda-Tech . same name as here ,
i have vouches , and if you want pics ill be glad to take some