Need ABS front & rear units for 97R
-
- New ITRCA Member
- Posts: 11
- Joined: March 8th, 2009, 10:55 pm
- Location: South Bay Area
- Contact:
Need ABS front & rear units for 97R
Hi all,
I am getting errors #s that tell me to replace both
front ABS pump/Valve unit and the ABS brain located in rear passenger wall.
Can anyone out there help?
I am getting errors #s that tell me to replace both
front ABS pump/Valve unit and the ABS brain located in rear passenger wall.
Can anyone out there help?
adam
'97 #356
'97 #356
-
- ITRCA Member
- Posts: 451
- Joined: December 18th, 2008, 7:11 pm
- Location: NORFOLK/NOVA
Re: Need ABS front & rear units for 97R
Are you sure your ABS speed sensors arnt whats actually failing??
I have never heard of the Brain AND Pump taking a poop.
I have never heard of the Brain AND Pump taking a poop.
I KILL car thieves.
-
- New ITRCA Member
- Posts: 11
- Joined: March 8th, 2009, 10:55 pm
- Location: South Bay Area
- Contact:
Re: Need ABS front & rear units for 97R
After a computer scan we got the following error codes:-
1 - 5.1 = Faulty ABS Accumulator and motor
2 - 5.3 & 8.1 = Faulty ABS Controller
We checked the ABS motor with a hot wire and it does not run.
I haven't seen any threads on faulty ABS either.
It's a drag that I seem to be the odd one out
1 - 5.1 = Faulty ABS Accumulator and motor
2 - 5.3 & 8.1 = Faulty ABS Controller
We checked the ABS motor with a hot wire and it does not run.
I haven't seen any threads on faulty ABS either.
It's a drag that I seem to be the odd one out
adam
'97 #356
'97 #356
Re: Need ABS front & rear units for 97R
ABS modulator 57110-s30-003
Interchanges with all 98+ integra, and 97+ prelude (EPC says except for 98, which i don't believe). Readily available used pretty much anywhere, ebay, car-part.com, etc...
I may have a 97R ABS ECU, i can't remember what i did with it. But it does not interchange with 98+ ITR.... been there, done that.
D
Interchanges with all 98+ integra, and 97+ prelude (EPC says except for 98, which i don't believe). Readily available used pretty much anywhere, ebay, car-part.com, etc...
I may have a 97R ABS ECU, i can't remember what i did with it. But it does not interchange with 98+ ITR.... been there, done that.
D
98#797
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
-
- New ITRCA Member
- Posts: 11
- Joined: March 8th, 2009, 10:55 pm
- Location: South Bay Area
- Contact:
Re: Need ABS front & rear units for 97R
Thanks for the input D.
I've been looking on carparts.com and there seem to be quite a few used modulator assemblies.
What the difference is between the $150 ones and the $350 guys I don't know.
If you can find your 97 ABS ECU I'd be really grateful.
They want $865 for a new one. I just rebuilt my engine with .25 oversize,
new head and much more so a used deal would be much appreciated right now.
I've been looking on carparts.com and there seem to be quite a few used modulator assemblies.
What the difference is between the $150 ones and the $350 guys I don't know.
If you can find your 97 ABS ECU I'd be really grateful.
They want $865 for a new one. I just rebuilt my engine with .25 oversize,
new head and much more so a used deal would be much appreciated right now.
adam
'97 #356
'97 #356
-
- New ITRCA Member
- Posts: 38
- Joined: February 2nd, 2009, 2:05 am
Re: Need ABS front & rear units for 97R
i have a 98 gsr ABS ecu and pump if interested
-
- New ITRCA Member
- Posts: 11
- Joined: March 8th, 2009, 10:55 pm
- Location: South Bay Area
- Contact:
Re: Need ABS front & rear units for 97R
Is the Modulator part # 57110-s30-003 ?
If so I'd be interested in that.
I am trying to find an original 97 ECU though.
thx
If so I'd be interested in that.
I am trying to find an original 97 ECU though.
thx
adam
'97 #356
'97 #356
-
- New ITRCA Member
- Posts: 38
- Joined: February 2nd, 2009, 2:05 am
Re: Need ABS front & rear units for 97R
i just checked online and its the same part number for 98 gsr..soo yes i do have one pm me if your interesteditr97-356 wrote:Is the Modulator part # 57110-s30-003 ?
If so I'd be interested in that.
I am trying to find an original 97 ECU though.
thx
Re: Need ABS front & rear units for 97R
I forgot to look over the weekend, i'll check the garage tonight.itr97-356 wrote:I am trying to find an original 97 ECU though.
thx
98#797
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
-
- New ITRCA Member
- Posts: 38
- Joined: February 2nd, 2009, 2:05 am
Re: Need ABS front & rear units for 97R
i have a the modulator for the OP..still waiting for his response
-
- New ITRCA Member
- Posts: 11
- Joined: March 8th, 2009, 10:55 pm
- Location: South Bay Area
- Contact:
Re: Need ABS front & rear units for 97R
Hi D and 98allmotor,
Just got back from a trip.
It seems that the Type R has a different ABS Modulator Valve to the GSR.
http://www.trademotion.com/partlocator/ ... atalogid=0
However the motor is the same. So still looking for the Modulator I'm afraid
I hope you find the ECU D
thx for your attention guys
Just got back from a trip.
It seems that the Type R has a different ABS Modulator Valve to the GSR.
http://www.trademotion.com/partlocator/ ... atalogid=0
However the motor is the same. So still looking for the Modulator I'm afraid
I hope you find the ECU D
thx for your attention guys
adam
'97 #356
'97 #356
-
- New ITRCA Member
- Posts: 38
- Joined: February 2nd, 2009, 2:05 am
Re: Need ABS front & rear units for 97R
That link shows a modulator for a 97 GSR which is a different part number then the 98 GSR..the 98 GSR modulator is the same part number as the 97 ITR
Re: Need ABS front & rear units for 97R
Not really, true for 1997... ITR gets the new style smaller ABS modulator, GSR/LS retain the OBD1 style large piece of crap.itr97-356 wrote:It seems that the Type R has a different ABS Modulator Valve to the GSR.
All 98+ integra share the same ABS modulator, the ECU's are different between ITR and the rest however. I can pull all the part numbers if you wish, or seach all my old posts on ht, HTk or here, can't remember where it was.
Hang tight, found some stuff in the garage.
98#797
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
-
- New ITRCA Member
- Posts: 38
- Joined: February 2nd, 2009, 2:05 am
Re: Need ABS front & rear units for 97R
I know the ecu are different for the years but I'm pretty sure the 98 modulator is the same because they are exact same part numbers
Re: Need ABS front & rear units for 97R
97 ITR modulator = all 98+ Integra Modulator.98allmotor wrote:I know the ecu are different for the years but I'm pretty sure the 98 modulator is the same because they are exact same part numbers
97 and earlier anything but type r = ghetto large modulator.
I'm not sure if we're saying the same thing or not, i've pulled all the part number many a times.
2 normal integra, 1 98ITR, 1 97ITR ecu.
97 ITR ABS ECU:
98#797
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
-
- New ITRCA Member
- Posts: 38
- Joined: February 2nd, 2009, 2:05 am
Re: Need ABS front & rear units for 97R
Yeah were saying the samething...looks like we have what he needs I have the modulator and you have the ecu
-
- New ITRCA Member
- Posts: 11
- Joined: March 8th, 2009, 10:55 pm
- Location: South Bay Area
- Contact:
Re: Need ABS front & rear units for 97R
I just spoke to an Acura dealer and they confirm D's info.
The 97 R got the new modulator a year earlier than the other models, yeah.
So if D can find the ECU it seems like you guys have got me covered
The 97 R got the new modulator a year earlier than the other models, yeah.
So if D can find the ECU it seems like you guys have got me covered
adam
'97 #356
'97 #356
Re: Need ABS front & rear units for 97R
Already found, pictured above.itr97-356 wrote:So if D can find the ECU it seems like you guys have got me covered
98#797
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
98#551
There is sufficient evidence to indicate that the rate of increase in output per unit increase of input decreases as the input increases
-
- New ITRCA Member
- Posts: 11
- Joined: March 8th, 2009, 10:55 pm
- Location: South Bay Area
- Contact:
Re: Need ABS front & rear units for 97R
Wow...yeah D...fantastic
I must congratulate you both on being a credit to "R" community.
Will PM for $ talk.
I must congratulate you both on being a credit to "R" community.
Will PM for $ talk.
adam
'97 #356
'97 #356