ITRCA

Ok so I decided on going with these wheels. The Gram Light 57 Maximum Pros



I am going to go with a 17x7 wheel. But I am going to need your guyses help choosing an offset that will fit with my big brake kit from Rotora. These are my options.

http://www.upgrademotoring.com/wheels/g ... um_pro.htm

I have a set of 18x8 Axis Widetracks 50mm lip on right now. I cant lower my car any lower or else the tire will rub on the fenders. My tire and wheel stick out past my fender by about an inch. I also had to use a really thin spacer so it barely fit without rubbing.

Post up as much information on the brake kit from Rotora. I will say it will be difficult to give you exact advice since many here have not run the Rotora setup. Any reason for this brake kit?

Ok this is what is on their application sheet

INTEGRA (TYPE R) 97-01 DC2

F = Front

RBK006.01AC = Part #

Caliper
4 = Caliper Pistons

FC4-A = Caliper Type

Disc
295X23 = Disc Size (MM)

1-PIECE = Disc Type

Wheel Chart
25 = A (MM)
174 = B (MM)
96 = C (MM)