ITRCA

Nice videos. Good choice on those GSR rims, they look perfect on that car!! Thank You... Hopefully this time a year from now I'll have some 12.5 video's for viewing. Changing the looks of the car next year as well, putting the OEM SI wing back on and hopefully converting to a 5 lug ITR conversion w...

yes it'll bolt on, most all b-series parts are interchangeable

* There are some exceptions... but for now, yes the b16 IM will fit the B18B motor.

Dynojet? Where are you from? What Intake? Stock Cams? What are your plans? Yes I was using the stock ITR JDM 4-1 header. Intake was a AEM ITR CAI. Internally the motor is completely stock so obviously the cams, pistons, etc.. were factory. Only made two runs and they were on a dynojet and I live in...

honostly they all do about the same thing... Any short ram will work..

Well I got a chance to make a few pulls on the dyno this weekend so I thought I'd take advantage of it. Didn't do any tuning at all so only base pulls were made. Figured it would be a waste to tune the motor now since I'll be tearing it apart in a few months. Just to refresh peoples mind about my se...

Everyone has their own opinion about clutches... Personally I doubt anyone beats or drives there car harder than I... I personally have been running the Exedy Organic ($268 shipped on coximports.com) for the last 4ish years... This clutch has seen 125shot, multiple 9800rpm N/A build, 9psi Jackson Su...

So this was just a stock JDM dropped into your 99si? nothing else? pretty much... only thing I've done to the motor is add a AEM intake, and Apexi WS Exhaust... (also a clutch to hold the 8K launches) I know its hard to beleive that the motor is completely stock other than the clutch/exhaust/intake...

all you need is a 14.799

Ok just got all the video's uploaded onto my site so here's the links...

13.50 @ 100.33 mph Video - Stock JDM R in/99 Si Coupe

All other SM video's can be found HERE

Go to the track and see... I've been in a lot of hard pulling b16's (hatches/Coupes) yet to see them only run 14.8 or slower so... Prove me wrong

Erik B wrote:On this board I think Jan has the fastest at like 12.8 or something like that...

Isn't he boosted though? Either way, nice time.

I guess some have been having link problems cause these video's are on my friends site, so we're uploading them all onto SirromMotorsports.com Pictures / Videos which is a bigger site that will be able to hold their size. Everything should work by tonight, I'll post new links to these video's once I...

Just thought I'd post up a video that we made this weekend outta bordum. Right click and save... Hope you like. Just thought I'd post something for you guys to watch.

File Size: 41.4MB
Format: MPG
Download>>


More video's can be found HERE if anyone is interested... Enjoy!

Erik B wrote:Holly 56k ownage Batman...my computer almost burned down...I check it out at work

yeah I know, definately not dial up friendly... It shows about 10ish races in this video, both in and out of the car shots..

Sorry it took so long, had to have a friend upload it for me. Here's a link to a few of my 13.5 runs on Halloween at Portland International Raceways... http://sirrommotorsports.com/forum/showthread.php?s=&threadid=2440 Click on the link, then right click and save as on the link called DOWNLOAD. ...

Nice work... good job

13.50 @ 100.33 for me

AEM CAI, Apexi WS Exhaust w/test pipe.

the decibal meter reader would have to have its microphone right by the exhaust tip to get a reading. Doesn't sound like he used one.

Here's what you do..this will work it's the law ;) If you have your emissions paper work I'd take that into court with you. Bring up the fact that the outta city cop pulled you over in a city that was outta his juristiction (however some police agencies have combined agreements) so you might wanna f...

when doing all the math, the CTR's with a 2 layer head gasket in a JDM R would bump it up to 12.08:1 CR. Has anyone had experiance with these pistons in there R motors? They're just a drop in pistons (meaning not block work needed) so I thought maybe I could run CTR's and Eagle rods to produce 12:1 ...

Jan Niemi wrote:I've pulled numerous 1.8s and 1.9s on street tires. You do realize that Drag Radials are street tires (impractical but true)

I was refering to the stock ITR tires that he was prolly using, sorry should have been more clear.

1.8 to 1.9 60' on street tires isn't gonna happen. Slicks it will. 2.2-2.3 isn't a bad 60'. You might be short on midrange power. Considered a VAFC or Hondata? about time someone gives some helping advice... You'll NEVER get below 2.0 60' for one on streets... Slicks, yes... It's possible to get do...

Actually ended the season last week at Portland International Raceway's running 13.501 @ 100.33 mph on my stock internal ITR motor. My setup is a 99 Civic Si Coupe with AEM CAI, Apexi WS Exhaust and a Exedy clutch and flywheel. Other than that, theres not really much else to keep a secret. Just driv...

13.501 @ 100.33mph - Bone Stock N/A JDM ITR in a 99 Civic Si

Mods: AEM CAI, Apexi WS Exhaust, and Clutch/Flywheel.

last racing event of the season in this area was this last weekend (Halloween Weekend) and I was able to run my overall fastest ET along with MPH so I was extremely happy with the cars performance this weekend. Here's my two fastest runs... hope to get video of them up soon. Ran 13.9 on my first pas...