dyno video 2000 turbo ITR

Integra Type-R Discussion - Discuss general ITR information, technical information (including requests for technical/mechanical help/assistance), modifications, tuning, etc.
Locked
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

dyno video 2000 turbo ITR

Post by Jan Niemi »

http://home.comcast.net/~jniemi1970/senseidyno1.mpg

right click save as...11meg

this is one of my 295whp pulls, listen for the VTEC changeover, pretty dramatic sounding...

here's one little clip, I have a vid that's 57meg, too big for me to host,
so I will post little clips here and there..

here's another, that's Dropspeed standing by the monitor with the earmuffs on....cough...pussy....cough...(from the board, and HT), he has the fastest na ITR in Michigan, I have the fastest turbo ITR in Michigan (that we know of) anyways he had to stop by and witness the smackdown..here's Matt's face when he saw the numbers... :shock:


http://home.comcast.net/~jniemi1970/senseidyno6.mpg
Last edited by Jan Niemi on February 22nd, 2004, 7:14 pm, edited 1 time in total.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Boosted R 25
New ITRCA Member
Posts: 13
Joined: February 15th, 2004, 4:38 pm
Location: Chicago, IL
Contact:

Post by Boosted R 25 »

Nice Video. Got to have more. but 2 questions. When do you have your vtec kick in? and why can i see so much of your exhaust fumes? Is that because you only use a striaight pipe (no catylac converter)?? or is it because you dump your wastegate in to the exhaust?
'00 Turbo ITR #0654
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

exhaust

Post by Jan Niemi »

With turbo and high compression, you have to run somewhat of a rich tune to keep things cool and to prevent detonation, the car is tuned at 11.5 air fuel ratio pretty much across the band... at the end of the pull, that's just oil getting sucked into the intake and then burned (I still need to hook up my catch can properly to prevent that....)
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
typer rick
New ITRCA Member
Posts: 35
Joined: November 14th, 2003, 1:06 pm

Post by typer rick »

How much boost where you running?
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

boost

Post by Jan Niemi »

according to the pressure sensor that my tuner used for datalogging, boost crept up to 11-11.5.....not what I expected, my boost gauge has never shown anything above 9Psig
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
Kangbateh
ITRCA Member
Posts: 162
Joined: January 24th, 2003, 3:39 am
Location: Minnesota

Post by Kangbateh »

you said it right Jan "Gears in my head, gasoline in my veins...life is good!" Life is good, congrats! :twisted:
Erik B
Senior ITRCA Member
Posts: 1029
Joined: September 18th, 2002, 12:29 am
Location: Cheyenne, WY
Contact:

Post by Erik B »

Not bad Jan...I can't see the video (56k ownage) I'll check it out at work. Do you have the dyno plot you can post? I'm interested in comparing it to mine.
2000 Turbo Integra Type R - 508whp/362lbs tq @ 21psi
2003 Imola/Imola NSX-T
http://www.jdmwhoreinc.com
IWannaTypeR
New ITRCA Member
Posts: 3
Joined: February 11th, 2004, 7:50 pm

Post by IWannaTypeR »

cars pretty dirty isnt it?
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

dirty

Post by Jan Niemi »

IWannaTypeR wrote:cars pretty dirty isnt it?
I was waiting for that..I've had the car for over 4 years, and this is the first time it's seen salt. Friday was warm about 40 degrees a little rain, by Saturday morning it was about 20 degrees, all the rain froze and it snowed about 3 inches overnight, I waited a month for my dyno appointment, so I wasn't about to cancel, oh well, it will wash off...I was hoping for better weather, but it's Michigan.... :roll:
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Re: dirty

Post by ITR41 »

Jan Niemi wrote:
IWannaTypeR wrote:cars pretty dirty isnt it?
I was waiting for that..I've had the car for over 4 years, and this is the first time it's seen salt. Friday was warm about 40 degrees a little rain, by Saturday morning it was about 20 degrees, all the rain froze and it snowed about 3 inches overnight, I waited a month for my dyno appointment, so I wasn't about to cancel, oh well, it will wash off...I was hoping for better weather, but it's Michigan.... :roll:
don't worry jan I have more dents than a smashed pop can in my car. I wish I didn't have crap internet that way I could watch that vid. but again congrats on the #'s and for those who don't know the mustang dyno is more accuate than a dyno jet for real world numbers but always reads a bit lower...top end blitz made 317whp on a mustang dyno and 367whp on a dyno jet with only 2 psi difference in boost settings
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

numbers

Post by Jan Niemi »

thanks, I'm very happy with the numbers, the powerband is so linear, and the torque curve flat - I know the MD shows lower numbers, but that's ok, that's what the dragstrip is for, I'm looking forward to April when the local strip opens over here so that I can go out and play a little.. :wink:
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
typer rick
New ITRCA Member
Posts: 35
Joined: November 14th, 2003, 1:06 pm

Post by typer rick »

I would love to know about how much did you spend for your hole setup.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

how much

Post by Jan Niemi »

typer rick wrote:I would love to know about how much did you spend for your hole setup.
I think you can imagine....let's just say, way, way too much, but worth every penny! :wink:
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
F0rsfed
ITRCA Member
Posts: 78
Joined: July 8th, 2003, 12:42 pm
Location: Columbia SC
Contact:

Post by F0rsfed »

Lol I can agree and fully understand
00' Turbo R<-----#167
All Stock B18c5
Full-Race t3/t67 powered

91' Civic 4dr
Beater

| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
typer rick
New ITRCA Member
Posts: 35
Joined: November 14th, 2003, 1:06 pm

Post by typer rick »

Love the car, but aren't you scared someone would steal it. I hope you have a good alarm system for it. My friend and I are going to design some kind of alarm setup for the car if it works out I would keep it, but if it don't bye typeR :cry:. Love my typeR more than anything in the world but I just can't take the head-ache anymore. If the setup works I would only email typeR owners sorry other honda oweners, but to me If you don't own one your the enemy. I'm sorry I'm talking like this but I hate to hear ITR's getting stolen every minute.
Jan Niemi
Senior ITRCA Member
Posts: 825
Joined: November 19th, 2002, 1:04 pm
Location: City of Boost
Contact:

not worried

Post by Jan Niemi »

typer rick wrote:Love the car, but aren't you scared someone would steal it. I hope you have a good alarm system for it. My friend and I are going to design some kind of alarm setup for the car if it works out I would keep it, but if it don't bye typeR :cry:. Love my typeR more than anything in the world but I just can't take the head-ache anymore. If the setup works I would only email typeR owners sorry other honda oweners, but to me If you don't own one your the enemy. I'm sorry I'm talking like this but I hate to hear ITR's getting stolen every minute.
It's not my daily driver, so it stays locked up in an undisclosed location that is very secure...not worried about it. Besides, I have insurance. I never go anywhere with the car if I know it will be parked from my field of vision.
http://speedindustry.biz
for all of your tuning, parts, fabrication and other service needs.
F0rsfed
ITRCA Member
Posts: 78
Joined: July 8th, 2003, 12:42 pm
Location: Columbia SC
Contact:

Post by F0rsfed »

Yeah i always park mine where I can see it. But I have a couple features that will make it pretty hard to still with out a tow truck.
00' Turbo R<-----#167
All Stock B18c5
Full-Race t3/t67 powered

91' Civic 4dr
Beater

| Team RUSH | Vouches | Full-Race | Fast-Turbo | Crp Turbo |
ITR41
ITRCA Member
Posts: 217
Joined: October 11th, 2002, 1:22 am
Contact:

Post by ITR41 »

I just drive mine. if someone wants it bad enough they will get it. park in a well lit area and that is about all you can do
98 ITR
14.108@98mph all motor
greddy custom turbo set up from hybridynamics, 450cc injectors, cartech FMU, missing link, AFC, 255lph pump, inline pro head gasket and block gaurd, profec-b.
13.0@109mph-street tires, stock exhaust, stock internals, pump gas, ac, ps
http://www.hybridynamics.com
soon to be GE 83MM sleeved block ready for 25psi and 11's?
TurboR1391
New ITRCA Member
Posts: 19
Joined: March 9th, 2004, 8:53 pm
Location: Somewhere, Texas
Contact:

Post by TurboR1391 »

Very cool video. Looks too much like my car :P
2000 DC2R #`1391 (boosted)

1995 EJ1 B18C1 (Beater)
Locked